START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
450 Class Electric Helicopters 450 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
04-25-2012, 12:13 PM | #1 (permalink) |
Registered Users
Join Date: Oct 2011
|
450 DFC Head on a 450 SE V2?
Hey Guys, just finish building a T-Rex 450 SE V2 and was wondering if this bird can be fitted with the Align 450 DFC Head. Thanks for your inputs.
__________________
Abbottts-RCHeli Last edited by abbotts; 04-25-2012 at 02:31 PM.. |
Sponsored Links | |||
Advertisement |
|
04-25-2012, 02:43 PM | #2 (permalink) |
Registered Users
Join Date: Mar 2010
|
yes
It's supposed to, the kit claims as much
If your main shaft is fitted with the permanent collar, it will take the DFC kit. Mostly certain |
04-25-2012, 03:30 PM | #3 (permalink) | |
Registered Users
|
Quote:
No Not without modifications. The head won't fit on your mainshaft the hole for the jesus bolt is too high up on the head to fit properly. And The DFC shaft places the main gear about 1.5 mm too high in the frame, The hub for the owb fouls the bottom bearing block. You can consider grinding the collar off the dfc shaft and using the collar, this will place the head about 1.5mm lower than it sits on the pro, or you can consider removing material from the owb collar and raising the main gear about 1.5mm higher than stock.
__________________
Diabolo 550 Vbar NEO : Diabolo 600 Vbar NEO : Diabolo 700 Vbar NEO: OXY 5 Vbar NEO : Logo 600SX V2 Vbar NEO : SAB G380 Vbar NEO : OXY3 TE : Vbar Control : Citizen 735 |
|
04-27-2012, 03:12 PM | #4 (permalink) |
Registered Users
Join Date: Mar 2010
|
The DFC kit comes with a new mainshaft with the holes in the right place.
It instructions on the kit say good to go for sport V2. I have fitted to original sport by grinding the new collar off so I would think the V2 would work with the same or less effort. Mostly certainish |
04-27-2012, 04:20 PM | #5 (permalink) | |
Registered Users
Join Date: Mar 2010
|
Quote:
__________________
Blade 130X Xtreme-Production
Blade mCP X (Bl) Blade Nano CP X Prôtos 700 |
|
Thread Tools | |
Display Modes | |
|
|