Register Now

josericardone · 03-29-2014, 10:44 PM

in my goblin everything was good until today i was making a invert and i loose tail authority
and then the tail hold again what could be that

Blade120 · 03-30-2014, 02:03 AM

try going up on the gain first go up a bit fly it around and so on.

josericardone · 03-30-2014, 09:01 AM

But in the tx only because i set the gain in the software

Blade120 · 03-30-2014, 02:11 PM

You can change the gain in the transmitter at the field as well it will work

Sent from my SCH-I605 using Tapatalk

tony521 · 03-30-2014, 04:23 PM

If you didn't change the setting in the advanced menu, you can still adjust your gain through your tx. And when you get done and comfortable with it, then go into the advanced menu , under the receiver section and change it so the software has it locked in. and use your gyro switch for something else .

03-29-2014, 10:44 PM	#1 (permalink)
josericardone Registered Users Join Date: May 2011	tail authority in my goblin everything was good until today i was making a invert and i loose tail authority and then the tail hold again what could be that

03-30-2014, 02:03 AM	#2 (permalink)
Blade120 Registered Users Join Date: Jan 2011 Location: California	try going up on the gain first go up a bit fly it around and so on. __________________ Trex 500 ESP(DFC) Ikon, Radix] [Goblin 700 CompBK, 4525, Ikon, Helix 695 ] [Rave ENV Nitro O.S 105-R,Ikon,Cyclone] Rave ENV Electric]Scorpion 4525,Ikon, Outrage, SAB [Goblin 500] Ikon Rails 516 ]Blade 180 CFX]Goblin 570 12S Xnova

03-30-2014, 02:11 PM	#4 (permalink)
Blade120 Registered Users Join Date: Jan 2011 Location: California	You can change the gain in the transmitter at the field as well it will work Sent from my SCH-I605 using Tapatalk __________________ Trex 500 ESP(DFC) Ikon, Radix] [Goblin 700 CompBK, 4525, Ikon, Helix 695 ] [Rave ENV Nitro O.S 105-R,Ikon,Cyclone] Rave ENV Electric]Scorpion 4525,Ikon, Outrage, SAB [Goblin 500] Ikon Rails 516 ]Blade 180 CFX]Goblin 570 12S Xnova

03-30-2014, 04:23 PM	#5 (permalink)
tony521 Registered Users Join Date: Jul 2010	If you didn't change the setting in the advanced menu, you can still adjust your gain through your tx. And when you get done and comfortable with it, then go into the advanced menu , under the receiver section and change it so the software has it locked in. and use your gyro switch for something else . __________________ Atom500(FBL)., Gaui x4II (FBL) ;Trex450 sport (FBL). All with Ikon fbl gyro. AMA#1019423. Tony .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-30-2014, 09:01 AM	#3 (permalink)
josericardone Registered Users Thread Starter Join Date: May 2011	But in the tx only because i set the gain in the software

Register Now

Log-in