Register Now

OICU812 · 08-31-2006, 09:23 PM

Got two 5S1P lipos I want to make into a 10S1P total lipo, need to make me a series plug, two male deans for connecting into the two seperateo lipos to a female which will connect to the esc male. If anyone has a picture or simple diagram that would greatly help me out so I can "safely" make one. I did make them before on my nitro starters but of course I do not have those anymore.

Thx if you can help.

epc2 · 08-31-2006, 10:06 PM

Shawn here you go.

OICU812 · 08-31-2006, 10:46 PM

Thats perfect, thank you Ed.

Lzfalcon · 10-06-2006, 09:32 AM

Does this increase volts or mAh. I wire my starter with the 2 blacks and 2 reds to one deans from the two pacs on a 3000 mAh to make 6000 mAh. Is this correct?

CopterKid · 10-06-2006, 10:54 AM

Series will add the voltage of the two packs together, the capacity will be the same (assuming both packs are the same capacity). You are wiring in parallel which keeps the voltage the same and doubles the capacity, again assuming the packs are the same.

Helicopter Hobbies · 12-02-2006, 02:53 PM

Not trying to pry in, but here is a link to a series plug from my New Products page. http://www.helicopterhobbies.com/ima...swiringmed.JPG

Harold Little

wecoyote · 12-02-2006, 03:27 PM

Series is "pos. to neg. to pos. to neg"..... This will multiply voltage but keep capacity the same.

Parallel is "pos. to pos. and neg. to neg"..... This will multiply capacity but keep voltage the same.

band · 12-06-2010, 11:32 PM

I might add this diagram, I like to show it around. I don't hook up my bec's this way though...I hook up to only one of the batteries.

dialarotor · 12-25-2011, 07:38 AM

http://www3.towerhobbies.com/cgi-bin...%2Fb%3Enectors

dialarotor · 12-25-2011, 07:40 AM

Parallel styles available too

http://www3.towerhobbies.com/cgi-bin...ORS+&search=Go

08-31-2006, 09:23 PM	#1 (permalink)
OICU812 Registered Users My HF Map location Join Date: Oct 2005 Location: Grande Prairie, Alberta	Brainfart, I need a pic of a series plug Got two 5S1P lipos I want to make into a 10S1P total lipo, need to make me a series plug, two male deans for connecting into the two seperateo lipos to a female which will connect to the esc male. If anyone has a picture or simple diagram that would greatly help me out so I can "safely" make one. I did make them before on my nitro starters but of course I do not have those anymore. Thx if you can help. __________________ ...Once upon a time there were Nitros, flybars & frequency pins...Shawn

08-31-2006, 10:46 PM	#3 (permalink)
OICU812 Registered Users Thread Starter My HF Map location Join Date: Oct 2005 Location: Grande Prairie, Alberta	Thats perfect, thank you Ed. __________________ ...Once upon a time there were Nitros, flybars & frequency pins...Shawn

10-06-2006, 09:32 AM	#4 (permalink)
Lzfalcon Registered Users My HF Map location Join Date: Jan 2005 Location: Plymouth MA	Does this increase volts or mAh. I wire my starter with the 2 blacks and 2 reds to one deans from the two pacs on a 3000 mAh to make 6000 mAh. Is this correct? __________________ "Just Fly It" AMA 819728

12-02-2006, 03:27 PM	#7 (permalink)
wecoyote Registered Users Join Date: Jan 2006	Series is "pos. to neg. to pos. to neg"..... This will multiply voltage but keep capacity the same. Parallel is "pos. to pos. and neg. to neg"..... This will multiply capacity but keep voltage the same. __________________ There is a very fine line between "hobby" and "mental illness". Tom

12-06-2010, 11:32 PM	#8 (permalink)
band Registered Users Join Date: Apr 2006	I might add this diagram, I like to show it around. I don't hook up my bec's this way though...I hook up to only one of the batteries. Attached Thumbnails

10-06-2006, 10:54 AM	#5 (permalink)
CopterKid Join Date: Apr 2006	Series will add the voltage of the two packs together, the capacity will be the same (assuming both packs are the same capacity). You are wiring in parallel which keeps the voltage the same and doubles the capacity, again assuming the packs are the same.

12-02-2006, 02:53 PM	#6 (permalink)
Helicopter Hobbies Join Date: Nov 2006	Not trying to pry in, but here is a link to a series plug from my New Products page. http://www.helicopterhobbies.com/ima...swiringmed.JPG Harold Little

12-25-2011, 07:38 AM	#9 (permalink)
dialarotor Registered Users My HF Map location Join Date: Aug 2006	Available at TOWER HOBBIES http://www3.towerhobbies.com/cgi-bin...%2Fb%3Enectors

12-25-2011, 07:40 AM	#10 (permalink)
dialarotor Registered Users My HF Map location Join Date: Aug 2006	also Parallel styles available too http://www3.towerhobbies.com/cgi-bin...ORS+&search=Go

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in