raptor50v2 help

[borgo]

he pilots

first, srry for my englisch because im dutch!

i have a raptor 50 v2, now i want make him fbl, ive orderd the tt converie fbl head, he can be used for the x50 but also for the r30/50.

my question was, can i use the original main shaft thats belongs too the v2 in combi with the fbl head? i was thinking that he is too long, also in the original main shaft are not 2 holes for the head but one.

my second question, i use now a redline 53, can i stay by the stock pinion and main gear?

br frank borgo

[borgo]

never mind, i'll go for the mccp mixing

[tr911]

You can not use a raptor 30 main gear and pinion on a raptor 50 with out having problems.

[borgo]

???? i dont think you have read my post well!

[tr911]

My bad, I was thinking you were talking about using a 30 main gear and pinion with a REdline 53 engine. Sorry..

[borgo]

no problem

[djaypro]

I dont have FBL but Im pretty sure it's just the head and programming the electronics.

[NitroAl]

If you orderd the head for conversion of the R30/50 you will get a main shaft with the head, The head is different to the X50 as the hole for the main shaft is drilled all the way through, it uses the TitanSE mainshaft and it is longer above the top hole than the X50 one!

[borgo]

well thx to all........ive ordered,the x50 head but no mainshaft in there..maybe contact the dealer....also ive ordered the conversie too eccpm mixxing....is it cool or what?