X2/255 servos, post your setup

[fusionsx00]

I have hyperion ds11 amb
and im disappointed,the case cracked on 2 of them with 2 flights no crashes
and one is really weak. These are brand new.
the jr 285's I have in my 200 are working great.
im gona try the savox metal gear digitals.

http://www.amainhobbies.com/product_...ed-Micro-Servo

[lazor 22]

Savox 0257mg's on cyclic (aka the infamous Align DS410's) been working perfect but may upgrade to MKS DS92's in the future.

MKS DS95i on tail & I am in love...

[amb1]

Hi Lazor22,

Not liking the x2?? Notice you are loving the 95i but have an X2 for sale, let me know please as I'm thinking of pulling the trigger on an x2...

[zeeflyboy]

Going to be going with DS95i on tail and will be trying the new DS92 on cyclics... Should be good!

[lazor 22]

Yea the DS95i is freaking awesome. I'll send you a PM about the X2.

[fusionsx00]

Thanks for the stickeys nexgen
this thread needed them .

Here a update to my post
hyperion ds11-amb cyclics. There a tight fit, but Working great, no more cracked cases

Outrage os7654 tail, mini servo, kinda big but works great

[Thunder Fighter]

Running Futaba 3156mg on the swash and innolab 261 on the tail in my X2.

//Dennis

[Picofly]

I have Ino-Lab HG-D202MG on the swash and MKS DS95i on the tail.

Ino-Labs have been more crash-proof than I have expected. I haven't stripped a gear yet but two cases have broken (mounting tab broken).

MKS DS95i is an awesome tail servo!

[fusionsx00]

Ahhh,
I have to get one.
I think I wore out my outrage tail servo. It did really good for a while.
but flying 6 packs everyday for a few weeks, well its not holding anymore.

It doesn't wag, but on inverted backwards flight, I go to flip upright
half way I do a pitch stall, and bam full blow out.
I had 3 hard blowouts today, I disected the tail and its fine.
gotta be the servo,
I want a brushless servo , is the ds95i brushless?

[desertstalker]

Originally Posted by fusionsx00

I want a brushless servo , is the ds95i brushless?

Nope, coreless, still nice though.

[egicar]

3 x Inolab D202MG on swashplate and Inolab D201HB on the tail

Ciao,
Egidio

[fourfiftypro]

Hey guys have just brought the X2 FES with beastx and im having troubles, heli just seems unstable.. and is not liking tail bit wobbly/waggy, if possible would someone please post a beast x setup and just general do and donts, ideal 3d pitch range ect with the heli.

thankyou

[desertstalker]

Originally Posted by fourfiftypro

Hey guys have just brought the X2 FES with beastx and im having troubles, heli just seems unstable.. and is not liking tail bit wobbly/waggy, if possible would someone please post a beast x setup and just general do and donts, ideal 3d pitch range ect with the heli.

thankyou

FIrst of all did you upgrade the beastx to V3.0 of the software? Instructions are on the beast section of this forum. That is supposed (I have not had a chance to test mine) to give a large improvement in tail performance.

You will probably get more info on the beast forum, as the tuning instructions are the same for pretty much all helis.

[fusionsx00]

So can someone with a x2 beastx post there setup?

Give him a starting point, and then he can tune it in.

I know for smaller helis, the pots are going to be lower than
Stock(9o'clock)

The tail has to be tuned by setting it in the lowest headholding gain
In the parameters, get the highest gain without wag, in flight.

This part is best to get help in the beastx forum, if the tail mechanics
Are the problem, this forum is best.
Make sure it is bind free, and moves really smooth.
End points must be before it maxes out, servo ball on horn must be right too.
I get as close to center as possible, while still getting the full throw left and right.

Just post your questions in this forum and we will help you out.

[egicar]

My 255 (almost X2) with Microbeast V3 has the Pot.1 and Pot.2 a bit under 9 o'clock and Pot 3 at 9 o'clock.
The 255/X2 rotor geometry is perfect for the Microbeast and does't need mods.
See the attachment for my other setup/parameter points.

[pas2knut]

Will these work on the cyclic of the X2?

Hyperion DS09SMD

[heathy]

Hope so as thats what i'm using

[desertstalker]

Originally Posted by pas2knut

Will these work on the cyclic of the X2?

Hyperion DS09SMD

Yep, thats what I am using.

[pas2knut]

Originally Posted by heathy

Hope so as thats what i'm using

Originally Posted by desertstalker

Yep, thats what I am using.

Thanks Gents

[SurfCity]

Anyone using the stock servos that come with the combo? How are they performing?