Alees Rush 750 setup thread

[th0rg0d]

Originally Posted by hamstar78

im running 2200 with 105s and the tail holds great but do get the ocassional kick when im extreme with the pitch, but never even close to a blowout. im going to get some 110s soon.

What's your pitch range?

I think the low HS fad is to show people we don't need extreme HS to actually do 3d. Maybe for smack, but how many pilots really fly smack?


Sent from my Tapatalk using iPhone.

[hamstar78]

im running 12 degrees, actually had 13 degress but the head is very responsive so i lowered it down to 12

[PePito_]

I want to buy the xera 4530 motor, but i cant find this motor anywhere.

I Will run with edge 693 se blades.

Can anybody tell me where i can find this motor.

Please help me with this.

Best ragards from Chile

Rodney

[PePito_]

..

[dunkonu23]

Unfortunately Rodney, I can't find one, either.

Scott

[jamin_00]

AleeS Rush 750
Kontronik Pyro 700-52
Kontronik Powerjive
Radix 710fbl's
Radix 105's on tail
Vbar 5.3
Optipower 6s 5000's and Optipower Ultra's 6s 5300 in testing

[codfish124]

Originally Posted by jamin_00

AleeS Rush 750
Kontronik Pyro 700-52
Kontronik Powerjive
Radix 710fbl's
Radix 105's on tail
Vbar 5.3
Optipower 6s 5000's and Optipower Ultra's 6s 5300 in testing

looks like a nice set up

[jamin_00]

Cheers, I'm still unsure on servos tho

[codfish124]

im really liking the savox SB-2274sg they might just be a little over kill but i figor when the stretch kit is out they'll be very worth wile

[jamin_00]

Originally Posted by codfish124

im really liking the savox SB-2274sg they might just be a little over kill but i figor when the stretch kit is out they'll be very worth wile

OK, I got a few sets sitting here spare so I'll just grab some and chuck em in. I got a 2272MG HV or what ever it is tail servo so I'll be using that.

[PePito_]

Do we need a long shaft motor ??

[dunkonu23]

Originally Posted by PePito_

Do we need a long shaft motor ??

Yes. A shaft length of 39-41mm is necessary.

Scott

[jamin_00]

Originally Posted by dunkonu23

Yes. A shaft length of 39-41mm is necessary.

Scott

I fount this out during the build and its a point I did not mention in my thread!

[PePito_]

So jamin_00 you buy the Kontronik Pyro 700-52 with the long shaft.

I trying to decide the motor and my option are

Kontronik Pyro 700-52 (Long shaft)
KDE700XF-495 KDE

Any help please

[wolfdown]

Servo horns? I got torq servos, but none of the balls are 22mm to 24mm apart per manual. The closest are 20.9 or 26.7mmm. Are there other horns people are using?

Motor counter bearing? Tested the fit with my Xera motor. Looks like the shaft diameter is 6.01mm and the counter bearing is 5.99 or just under. Whats the best way to solve this?

[backburner1955]

Originally Posted by wolfdown

Servo horns? I got torq servos, but none of the balls are 22mm to 24mm apart per manual. The closest are 20.9 or 26.7mmm. Are there other horns people are using?

Motor counter bearing? Tested the fit with my Xera motor. Looks like the shaft diameter is 6.01mm and the counter bearing is 5.99 or just under. Whats the best way to solve this?

Any horn with Futaba spline will work. I use Quick UK FBL Wheels. 24mm spacing.

http://helidirect.com/quickuk-3g-fly...00-p-19709.hdx

[th0rg0d]

Originally Posted by wolfdown

Servo horns? I got torq servos, but none of the balls are 22mm to 24mm apart per manual. The closest are 20.9 or 26.7mmm. Are there other horns people are using?

Motor counter bearing? Tested the fit with my Xera motor. Looks like the shaft diameter is 6.01mm and the counter bearing is 5.99 or just under. Whats the best way to solve this?

Can you emory cloth that .02 difference? Or maybe throw the motor in the freezer for a bit?




Sent from my Tapatalk using iPhone.

[Charley Stephens]

Originally Posted by wolfdown

Servo horns? I got torq servos, but none of the balls are 22mm to 24mm apart per manual. The closest are 20.9 or 26.7mmm. Are there other horns people are using?

Motor counter bearing? Tested the fit with my Xera motor. Looks like the shaft diameter is 6.01mm and the counter bearing is 5.99 or just under. Whats the best way to solve this?

I use the Futaba 6 point stars middle holes on servos with that spline

[wolfdown]

This one? http://www.readyheli.com/FUTM2010-Fu...r_p_32812.html

[Charley Stephens]

Originally Posted by wolfdown

This one? http://www.readyheli.com/FUTM2010-Fu...r_p_32812.html

Yep those are the ones