START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
550 Class Electric Helicopters 550 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
03-22-2011, 08:41 AM | #1 (permalink) |
Registered Users
Join Date: May 2010
|
Batt chn on Rx for 2nd output from CC BEC?
Can I use the empty batt channel on a Spektrum 6000/7000 series Rx for the second output from the CC BEC pro? I know the batt channel is for binding but the bind plug is looped to cause the binding process to begin. I thought I read that some where. I was watching the MicroBeastx settup vids and it looks like he has something plugged into his batt channel on his 7000 Rx. I assume it would be a BEC ouput because it is a FBL heli and you need that extra juice for the servos.
|
Sponsored Links | |||
Advertisement |
|
03-22-2011, 09:04 AM | #2 (permalink) |
Registered Users
|
I do not have Spektrum but if necessary, a "Y" to any channel works well for any battery connection.
Fly safe, Glover |
03-22-2011, 09:26 AM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: May 2010
|
using a y connector, but a 6 channel does not have enough channels for 2 extra plug ins. Servo and gyro use 5 the 6th I have a y for ESC and only 1 connector from BEC. servos not getting the full benefit of 5 amps and then the second 5 amps. Just been hovering with that config not really flying around. I know better than to trust that current config. Just want to know if the batt can be used simply for power from BEC.
|
03-22-2011, 10:23 AM | #4 (permalink) | |
Registered Users
Join Date: Mar 2010
|
Quote:
__________________
T-rex 600N Dfc, SAB Goblin 500 DX8 |
|
03-22-2011, 10:40 PM | #5 (permalink) |
Registered Users
|
I have a small NiMH buffer pack connected to the batt port on AR 7000. Works great
__________________
Kontronik - the most commonly misspelled RC heli brand name Fusuno - the runner-up |
03-23-2011, 05:00 AM | #6 (permalink) | |
Registered Users
Join Date: Dec 2009
|
Quote:
|
|
Thread Tools | |
Display Modes | |
|
|