"Stealth" 700

[zguy]

Originally Posted by Jesse Kavros

3D Dave, This is the new Scorpion 160HV Opto. Plays very well with V-Bar Gov. Start ups seem to be fine for me.

Jesse

Hi Jesse,
Can you post some pics of how you mounted the new Scorpion ESC?
Also, what ESC settings and VBar gov settings/gain?
Thanks!!

[Jesse Kavros]

zguy,

Sorry for the late reply!

Here is a picture of the esc mounting!

I use all stock settings actually! The esc is set to external gov mode and that is it, nothing special !




Jesse

[zguy]

Originally Posted by Jesse Kavros

zguy,

Sorry for the late reply!

Here is a picture of the esc mounting!

I use all stock settings actually! The esc is set to external gov mode and that is it, nothing special !




Jesse

No Problem. Mine ended up in the same place and fits like it was made for it! I completed the set up yesterday, but have not flown it yet.


Per Georges, I'm using Auto timing and Current Protection = Insensitive.

My VBAR gov gain was 22 with the YGE ESC. What gain are you liking with the Scorpion ESC?

[Jesse Kavros]

Looks great!

My setup seemed to work fine at the stock Vbar gov gain of 30!

Is that a 4235 motor?

[zguy]

Originally Posted by Jesse Kavros

Looks great!

My setup seemed to work fine at the stock Vbar gov gain of 30!

Is that a 4235 motor?

Thank you.

The ext gov gain seems pretty forgiving on these big set-ups. Scorpion suggests a VBar gov gain of 30-40 in the ESC setup guide. Just another tuning parameter to play with!

It's the 4535 on 14S & 760mm.

[Buzz29Heli]

Hey guys,

So to use the VBar Gov you must use the opto cable?

[Raving jim]

Opto cable is needed yes for rpm signal

[Buzz29Heli]

Originally Posted by Raving jim

Opto cable is needed yes for rpm signal