Register Now

ppresti · 02-28-2010, 10:20 AM

I setup the AP2000 in a Z230 heli, I tested the unit using my hand and it works but I'm not sure if it working the right way. it tilts toward my hand, it seems to me it should be tilting away form my hand. Should it tilt toward or away form hand??

nightflyr · 02-28-2010, 10:48 AM

Never installed a 2000 but it should react opposite to the thermal mass placed before it.

If you put your hand towards the front of the sensor the swash should lean away, at least that is how the CPII reacts and being they are both thermal pile based i would assume they should react equally

ppresti · 02-28-2010, 11:03 AM

So I guess my feeling was right in should be moving away from my hand,
Thanks for the quick response.

h20boynz · 02-28-2010, 02:08 PM

yip...put hand on right side of sensor...swash should tilt left.

ppresti · 02-28-2010, 02:33 PM

Thanks so much for the info, I will make the adjustment.

02-28-2010, 10:20 AM	#1 (permalink)
ppresti Registered Users My HF Map location Join Date: Dec 2009	AP2000i setup question I setup the AP2000 in a Z230 heli, I tested the unit using my hand and it works but I'm not sure if it working the right way. it tilts toward my hand, it seems to me it should be tilting away form my hand. Should it tilt toward or away form hand??

02-28-2010, 10:48 AM	#2 (permalink)
nightflyr Registered Users My HF Map location Join Date: Jan 2009 Location: Long Island, NY	Never installed a 2000 but it should react opposite to the thermal mass placed before it. If you put your hand towards the front of the sensor the swash should lean away, at least that is how the CPII reacts and being they are both thermal pile based i would assume they should react equally __________________ MSR x1 / mCPX x2 / 450 x4 / Chaos600 test bed / Chaos600 Air-Wolf / American WereWolf 800 / KFrame800/900/1000 / Assorted Fixed Wing JR9303 / JR9503 / Futaba10CHP

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-28-2010, 11:03 AM	#3 (permalink)
ppresti Registered Users Thread Starter My HF Map location Join Date: Dec 2009	So I guess my feeling was right in should be moving away from my hand, Thanks for the quick response.

02-28-2010, 02:08 PM	#4 (permalink)
h20boynz Registered Users Join Date: Aug 2009	yip...put hand on right side of sensor...swash should tilt left.

02-28-2010, 02:33 PM	#5 (permalink)
ppresti Registered Users Thread Starter My HF Map location Join Date: Dec 2009	Thanks so much for the info, I will make the adjustment.

Register Now

Log-in