START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Main Forum - Helicopter Talk R/C Helicopters and the people who fly them. VENDOR TOPICS DO NOT GO HERE. Full Scale Heli threads go in OT please |
|
LinkBack | Thread Tools | Display Modes |
09-27-2012, 12:48 PM | #1 (permalink) |
Registered Users
Join Date: Sep 2006
|
Using CCPro to adjust the output of a 3S to 6.0 volts?
Hi Freaks!
This may be an obvious, but I'm gonna ask anyway. I have a CC BEC Pro that I am using. I have so many 3S Lipos that I am using one of them as the receiver pack, but am adjusting the output voltage of the BEC to 6.0 volts. I just wanted to make sure this OK to do? Am I missing something that should make me only use a 2S for the receiver, servos and Brain? I am using a step-down for the Tail Servo. If it is OK, will the charge last 1/3 longer than if using a similar 2S? Thanks! Ed |
Sponsored Links | |||
Advertisement |
|
09-27-2012, 01:29 PM | #2 (permalink) |
Registered Users
Join Date: Jul 2010
|
You should be fine!
__________________
If it can be done wrong, I will find a way to excel at it. |
09-27-2012, 04:14 PM | #3 (permalink) |
Registered Users
Join Date: Jun 2007
|
3S will work fine
a 2S would be lighter thats about it i run a BEC Pro on my 6HV off one of the two 6S packs and works fine
__________________
DX8 mSR, T-rex 500ESP 3G, Compass 6HV Savox servos Vbar 5.3Pro Rail Blades AMA#948801 |
Thread Tools | |
Display Modes | |
|
|