START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Hirobo Nitro Helicopters Hirobo Freya Evo Eagle Helicopters Discussion |
|
LinkBack | Thread Tools | Display Modes |
04-14-2009, 08:57 PM | #1 (permalink) |
Join Date: Feb 2009
|
not enough pitch on sceadu 30
hi guy i just finished seting up my sceadu 30 to the manual. and the manual shows to measure the lower ball link arms for pitch to 55mm approx. i noticed this was giving no negative pitch at all even when setting my dx61 up for negative. i was getting no pitch at 0 throttle and taking off a 30 % throtte so i ended up settig my throttle stick to centre and shortening the link rod as far as i possibly could before running out off threads on the links. i now have no pitch at 50% throtlle and hardly any negative at full minus throtle and also not much positve and have to have very high head speeds to take off at 70% throttle and not much punch or climb rate at full throttle. is the manual wrong? or how do i get rid off this? can anyone measure there link rod lenghs and post them for me
|
Sponsored Links | |||
Advertisement |
|
04-16-2009, 02:52 AM | #2 (permalink) |
Registered Users
|
What are your current pitch settings at low, middle, and high stick?
Also which links are you talking about? I'm assuming you're talking about the ones in the head (pg36, pt 33).
__________________
Airtronics SD-10G JR 9X T-Rex V2 Hitec HS-5065x3, Futaba S9650 Hirobo Sceadu Evolution HPM / OS Hyper 50 - K&S tuned pipe AHF Aeolus 50 on the bench! |
Thread Tools | |
Display Modes | |
|
|