Register Now

Bob O · 05-06-2009, 07:26 PM

Got this tail in yesterday from cnchelicopter.com:

http://www.cnchelicopter.com/servlet...400-CNC/Detail

Didn't get a chance to install it, but since very detailed pics can't normally be found on websites, I decided to take some macro shots of it for anyone interested. Once I get the tail installed, I'll post my flying impressions of it. So far, I'm very impressed with the way it feels, very smooth and precise, and theres just a minute amount of slop.

The last pic is of the CC BEC I installed today. My wiring job is a mess, good thing the canopy hides most of it.

Unkle_munkee · 05-06-2009, 08:04 PM

thanks for the great pics. Looks like good quality.

sokal · 05-06-2009, 08:55 PM

the shaft it comes with wont work

will need to use another or mod the stock
https://www.helifreak.com/showthread...=108627&page=5
post 75

Bob O · 05-07-2009, 10:10 AM

I read that whole thread Sokal....thanks!

Is the 397T belt a T-Rex 450 belt? If so, that's what I have in there right now. I hate to have to count that many teeth but I do have a spare so I'll start counting.....LOL! Also, being that the spare belt and tail aren't in the heli yet, I can test fit it.

Any more input is greatly appreciated!!!

Bob O · 05-07-2009, 11:37 AM

I counted the teeth on the T-Rex 450 belt and came up with 398. It's probably 397 but I wasn't about to go through that PITA again...LOL! I'm going to try it with that belt.

Sokal,

Had I known about your other thread with nice pics, I wouldn't have bothered with this one.

05-06-2009, 07:26 PM	#1 (permalink)
Bob O Member My HF Map location Join Date: Dec 2008	Sonix CNC tail - close up pics Got this tail in yesterday from cnchelicopter.com: http://www.cnchelicopter.com/servlet...400-CNC/Detail Didn't get a chance to install it, but since very detailed pics can't normally be found on websites, I decided to take some macro shots of it for anyone interested. Once I get the tail installed, I'll post my flying impressions of it. So far, I'm very impressed with the way it feels, very smooth and precise, and theres just a minute amount of slop. The last pic is of the CC BEC I installed today. My wiring job is a mess, good thing the canopy hides most of it. __________________ ):>

05-06-2009, 08:55 PM	#3 (permalink)
sokal Registered Users Join Date: Dec 2007	the shaft it comes with wont work will need to use another or mod the stock https://www.helifreak.com/showthread...=108627&page=5 post 75 __________________ B400 DS285/3400G/401/-8/40Aesc/sonicCNC/CNCframe TwinRexx: 6xHS-65/2xGY240/jfg500/TH2 CH-47D/UH-1H Crewchief/ Mechanic

05-07-2009, 10:10 AM	#4 (permalink)
Bob O Member Thread Starter My HF Map location Join Date: Dec 2008	I read that whole thread Sokal....thanks! Is the 397T belt a T-Rex 450 belt? If so, that's what I have in there right now. I hate to have to count that many teeth but I do have a spare so I'll start counting.....LOL! Also, being that the spare belt and tail aren't in the heli yet, I can test fit it. Any more input is greatly appreciated!!! __________________ ):>

05-07-2009, 11:37 AM	#5 (permalink)
Bob O Member Thread Starter My HF Map location Join Date: Dec 2008	I counted the teeth on the T-Rex 450 belt and came up with 398. It's probably 397 but I wasn't about to go through that PITA again...LOL! I'm going to try it with that belt. Sokal, Had I known about your other thread with nice pics, I wouldn't have bothered with this one. __________________ ):>

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-06-2009, 08:04 PM	#2 (permalink)
Unkle_munkee Join Date: Apr 2009	thanks for the great pics. Looks like good quality.

Register Now

Log-in