START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
2.4G Spektrum Radios Spektrum 2.4 Gigahertz Radios and Technology |
|
LinkBack | Thread Tools | Display Modes |
01-02-2012, 06:07 AM | #1 (permalink) |
Registered Users
Join Date: Dec 2007
|
DX8 Hold and throttle cut
Hi there.
Having trouble getting hold and throttle cut to work on my CC controlers with fixed RPM gov mode. I have assigned my hold to the rudder D/R switch but I can not seam to get the throttle cut value for auto bail out to this switch, it stays with the default HOLD switch. So I have two throttle hold values You can assign different switches for throttle cut, can not remember what they are but Rudder D/R is not one Am I doing some thing wrong or do you guys have a work around. Thanks In advance.
__________________
700E V2 800 Stretch,Vbar,KDE everything :700E DFC HV,Vbar,KDE:CC 160edge:550E KDE,Vbar mini,CC 120Edge, Scorp 4025-1100:450Pro 6S:250DFC:2X Mcpx DBL BL |
Sponsored Links | |||
Advertisement |
|
01-03-2012, 02:34 PM | #2 (permalink) | |
Registered Users
Thread Starter
Join Date: Dec 2007
|
Quote:
Just swapped the roles of the two switches by adjusting there values. Rudder D/R "hold" is set to the auto rotation window of the CC controler. HOLD switch is set to zero, CC arming. Use Rudder D/R for auto's, flip back out will give fast spool bail out. HOLD switch will give ESC arming and from there slow spool up. This frees up normal F-MOD which was zero throttle as per castle's quick tip video giving a third head speed if I chose to use it.
__________________
700E V2 800 Stretch,Vbar,KDE everything :700E DFC HV,Vbar,KDE:CC 160edge:550E KDE,Vbar mini,CC 120Edge, Scorp 4025-1100:450Pro 6S:250DFC:2X Mcpx DBL BL |
|
Thread Tools | |
Display Modes | |
|
|