Register Now

SYMAWD · 11-26-2011, 02:53 PM

I was putting on my last coat of primer and then my canopy fell

. In the process of sanding it smooth again and basically starting over. Will post pics when done.

HammerHead · 11-26-2011, 05:36 PM

Be glad you werent clear coating it.

GunnyGlow · 11-26-2011, 05:41 PM

Quote:

Originally Posted by HammerHead

Be glad you werent clear coating it.

+1

The primer is the easiest thing to fix, imo.

SYMAWD · 11-26-2011, 08:11 PM

Yep, I just scraped it all off. It's just that it was the last coat I was putting on and it was perfect. Now it isn't quite perfect, but pretty close.

Skiddz · 11-30-2011, 12:45 AM

Did that on the 1st lid I did for my 1st T600... Dropped it right on its nose and shattered the tip of the canopy. Quick coat of epoxy inside and then some epoxy and microballoons to fill in the busted out gelcoat and you'd never know it'd been dropped.

helipainter · 12-02-2011, 10:40 AM

When i blow it this early, i'm grabbing a rag and thinner and wiping it clean. It happens...... at least this way your right back in the game in minutes. Depending what kind of primer, keep it thin as possible unless it's a 2k type

weedwacker · 12-20-2011, 08:10 AM

A few months ago, with the help of a dog, I managed to drop a lexan body I had just put the last coat of clear on straight into a hot oven. Watched it curl instantly.

11-26-2011, 02:53 PM	#1 (permalink)
SYMAWD Registered Users Join Date: Mar 2010	Painting Nightmare I was putting on my last coat of primer and then my canopy fell. In the process of sanding it smooth again and basically starting over. Will post pics when done. __________________ Blade 130X Blade mCP X (Bl) Blade Nano CP X Prôtos 700 Xtreme-Production

11-26-2011, 08:11 PM	#4 (permalink)
SYMAWD Registered Users Thread Starter Join Date: Mar 2010	Yep, I just scraped it all off. It's just that it was the last coat I was putting on and it was perfect. Now it isn't quite perfect, but pretty close. __________________ Blade 130X Blade mCP X (Bl) Blade Nano CP X Prôtos 700 Xtreme-Production

11-30-2011, 12:45 AM	#5 (permalink)
Skiddz HF Support My HF Map location Join Date: May 2006	Did that on the 1st lid I did for my 1st T600... Dropped it right on its nose and shattered the tip of the canopy. Quick coat of epoxy inside and then some epoxy and microballoons to fill in the busted out gelcoat and you'd never know it'd been dropped. __________________ -Kevin No helicopters were harmed in the creation of this post. AMA CD # 7309, Turbine Waiver# RW 890 Click Here For Bergen Intrepid Turbine Build Videos

12-02-2011, 10:40 AM	#6 (permalink)
helipainter Registered Users Join Date: Sep 2009	When i blow it this early, i'm grabbing a rag and thinner and wiping it clean. It happens...... at least this way your right back in the game in minutes. Depending what kind of primer, keep it thin as possible unless it's a 2k type __________________ US Drones Aerial Media Pros Ritewing

12-20-2011, 08:10 AM	#7 (permalink)
weedwacker Registered Users Join Date: Mar 2009	A few months ago, with the help of a dog, I managed to drop a lexan body I had just put the last coat of clear on straight into a hot oven. Watched it curl instantly. __________________ 7HV \| sz 4926 \| Hyperion Phase sensor \| Helijive 120 \| VBar Fullsize Blue \| Torq HV's Trex 700e 3G \| 700MX \| Ice 120 HV \| WR Hercules \| I2 Tri-Blade Tail\| RotorTech 105's \| Voltz 3300 6s x2 \| Lynx Spindle Bolts

11-26-2011, 05:36 PM	#2 (permalink)
HammerHead Registered Users My HF Map location Join Date: Jul 2007	Be glad you werent clear coating it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in