difference between evo 30 6s 3200 vs polyquest 6s 3200?

[Martinshelis]

Both use enerland cells but they have different specs?Why is this?I can get the poly's for 215 and the evo 30's for 240.If all the specs are correct than the evo 30's can burst up to 60c but the polys burst at 50c but the polys would also be 95g lighter.What is the difference between the two besides the weight and burst rating and why are they different?Looking for some lipos for my ion-x.Anybody here use polyquest before?Thanks


evo 30 specs listed on towerhobbies and a couple other places are

SPECS: Size: 5.90 x 1.77 x 1.45" (150 x 45 x 37mm)
Weight: 21.16oz (600g)
Continuous discharge : 30C
Burst discharge : 60C


Poly Quest 3200XQ-22.2V(6S1P) 30C

3200mAh 22.2V(6S1P) 30C Lithium Polymer Battery.
Continuous discharge : 30C
Burst discharge : 50C

Nominal Voltage : 22.2V(3.7V * 6)
Capacity (mAh) : 3200mA
Temperature : Charge 0 ~ +45℃, Discahrge -20 ~ +60℃
Charge rate : 1C
Dimension (mm) : 38mm x 45mm x 150mm
Weight : 505g

[Martinshelis]

ok found a few more sites but this one is listing for the polyRC packs not the polquest and they are 6s 3200 30c continuos 50c burst but the weight is listed at 480 grams.I understand that these three different packs all use enerland cells but they have very differen't specs it seems that they are made differently and should have very different characteristics.Thanks


So here is what I have found.

PolyRC 6s1p 3200mah

1. most expensive 280usd
2. lowest advertised weight 480g
3. 30c continuous 50c burst

PolyQuest 6s1p 3200mah

1. Cheapest pack 215usd
2. 500g
3. 30c continuos 50c burst
4. Enerland promotes as #1 lipo

Flightpower 6s1p 3200mah

1. 240usd
2. Heaviest of the three 600g
3. 30c contiunuos but has a adverstised burst of 60c!