Still having problems with the Blade SR, help please!

[synseq]

Hey guys. I tried rebinding with the HP6DSM transmitter I am wondering if the transmitter is at fault and if not what else it could be. Here is what happens:

After turning on the transmitter first, then installing the flight battery, sometimes it will initialize with the two tones, and sometimes it wont. Either way the helicopter still spools up all by itself. There is no throttle input whatsoever. Even with the helicopter spooled up I can give it more throttle and it will lift up(I have it secured so it wont crash but I can see it trying to lift). However when I move the throttle stick all the way down the blades won't stop moving. I have to unplug the battery to stop it. Stunt mode is off, throttle hold is off, and the throttle trim is all the way down. I tried rebinding the transmitter, I verified the dipstick switches, and I disassembled the helicopter and put it back together. I just rebuilt it a few days ago so I'm not sure what the problem is. I've never been able to fly this thing for more than a couple of minutes. I have had to buy new parts and rebuild it 3 times. This is the first time I've had this problem though. Any input would be greatly appreciated. I can post some pics that I took after I rebuilt it or anything else you guys might need to help me diagnose the problem. I have a lot of cool stuff on my computer and I would be happy to compensate for anyone's help. Thanks

If you need any more information let me know. I can be reached via IM through the following:

google talk - synseq@gmail.com
yahoo IM - ATIPROCHARGEDGM@yahoo.com
MSN IM - closeone@hotmail.com

[Excalibur3]

Do you have negative pitch when throttle is all the down? Have you tried rebinding with the motor disconnected? And lastly HH would probably be a great help to you. Just make sure you get a guy who is familiar with your Heli.


HK250SR,Blade 450 3D,Blade 450 X,DX6I, Phoenix V4, Blade Nano CPX

[synseq]

How would I get a hold of someone from HH? Also what difference would rebinding the transmitter with the motor disconnected make?

[GSPI]

Originally Posted by synseq

How would I get a hold of someone from HH? Also what difference would rebinding the transmitter with the motor disconnected make?

[Excalibur3]

HH has solved everyone of my problems over the phone. As long as you get a tech that's familiar with your bird and you sound like you know what your talking about with them when trouble shooting then they will send you new parts. If you don't understand what they ask you they will make you send your bird in for repair. So I'm just saying do your homework before you call is my best advise. Good luck.


HK250SR,Blade 450 3D,Blade 450 X,DX6I, Phoenix V4, Blade Nano CPX

[synseq]

How much does that cost?

[D.LYON]

to bind sucsessfull you plug battery in then while holding top back left transmitter switch (trainer switch on dx6i) power on transmitter and then release switch. good luck

[GSPI]

Originally Posted by synseq

How much does that cost?

Free unless you have to send it in.

[DKS_ONE]

Originally Posted by D.LYON

to bind sucsessfull you plug battery in then while holding top back left transmitter switch (trainer switch on dx6i) power on transmitter and then release switch. good luck

Of course, you have to have the bind plug in the batt/bind port...

[Excalibur3]

Also make sure your TX is like 6' away from the Heli. Most of mine don't like to initialize when I have the TX too close. I find the further away the better. Lol


HK250SR,Blade 450 3D,Blade 450 X,DX6I, Phoenix V4, Blade Nano CPX

[Took]

Originally Posted by Excalibur3

HH has solved everyone of my problems over the phone. As long as you get a tech that's familiar with your bird and you sound like you know what your talking about with them when trouble shooting then they will send you new parts. If you don't understand what they ask you they will make you send your bird in for repair. So I'm just saying do your homework before you call is my best advise. Good luck.


HK250SR,Blade 450 3D,Blade 450 X,DX6I, Phoenix V4, Blade Nano CPX

I had a problem with my new SR after speaking with the techs at HH they wanted me to send it in. Said they would take care of collateral damage and make sure it's running right. They gave great cc in my opinion!


Sent from my iPhone using Tapatalk