Register Now

Chris_M · 02-26-2012, 07:48 AM

I talked to heli21 and he may make a run of aluminum braces if enough people are interested. I think they were $50 each even though he only had a couple made last time.

swalko · 02-27-2012, 05:22 AM

Friday ordered, today received

. Jan's frame stiffeners look really solid, double washers as are on pictures posted previously was replaced with single 2mm thick washer. I am satisfied

.

Chris_M · 02-27-2012, 06:18 AM

Must be nice to get parts in just a couple days

ZuvieleTeile · 02-27-2012, 08:25 AM

Quote:

Originally Posted by swalko

Friday ordered, today received

. Jan's frame stiffeners look really solid, double washers as are on pictures posted previously was replaced with single 2mm thick washer. I am satisfied

.

How much is a set of those stiffeners?

DT75 · 02-27-2012, 09:46 AM

Quote:

Originally Posted by ZuvieleTeile

How much is a set of those stiffeners?

RI-0203 - €18,49

They are listed in the "Chassis" column:

http://www.henseleit-helicopters.de/...hp?cPath=52_54

No pic, though...

AcidDrink · 02-28-2012, 11:25 AM

Are these any good (second picture from the top, not cross braces)? I've got pair of them with my heli. Worth replacing with Jan's (well, kind of rhetoric question but still

) ?

http://www.heli-innovations.de/

swalko · 02-28-2012, 01:05 PM

Quote:

Originally Posted by ZuvieleTeile

How much is a set of those stiffeners?

22 €

shaman3 · 02-28-2012, 02:25 PM

@AcidDrink:
I like the brackets from HI very much, they certainly do the trick, no need to replace them IMHO. Personally, I just don't need them any more since I have downgraded back to the 4525... (sometimes, less is more

However, I believe that a cross frame bracket is more important!
Daniel

jhunter · 02-28-2012, 02:46 PM

4530le?

AcidDrink · 02-28-2012, 05:11 PM

Quote:

Originally Posted by shaman3

@AcidDrink:
I like the brackets from HI very much, they certainly do the trick, no need to replace them IMHO. Personally, I just don't need them any more since I have downgraded back to the 4525... (sometimes, less is more

However, I believe that a cross frame bracket is more important!
Daniel

Thanks, I may leave them installed.

I had a look at cross frame bracket, but it's too intrusive, I don't really want to drill holes in the frame.

swalko · 03-16-2012, 02:51 AM

Xera 4530 with Jan's stiffeners. No marks on motor bell from frames after 4 flights, I hope it will stay so.

Vinger · 03-16-2012, 11:24 AM

Quote:

Originally Posted by swalko

Xera 4530 with Jan's stiffeners. No marks on motor bell from frames after 4 flights, I hope it will stay so.

Align strap?????

Jan promised to include it in my second kit, got nothing though?

jhunter · 03-26-2012, 02:37 AM

Thanks

mmc205 · 03-26-2012, 09:55 AM

I run a machine shop based in PA, USA and might be willing to have the Mick style braces machined if and sell them if the pricing works out. How many people want them? Does anyone have CAD drawings of them to work from?

I'd also like a "go-ahead" from Mick to do this as its his design originally. Does anyone have his email address?

swalko · 03-26-2012, 10:18 AM

Quote:

Originally Posted by jhunter

Thanks

I mean no, but this is not needed ... both solutions works.

DT75 · 03-26-2012, 10:36 AM

Quote:

Originally Posted by mmc205

I run a machine shop based in PA, USA and might be willing to have the Mick style braces machined if and sell them if the pricing works out. How many people want them? Does anyone have CAD drawings of them to work from?

I'd also like a "go-ahead" from Mick to do this as its his design originally. Does anyone have his email address?

Maybe you should hook up with heli21..? :

https://www.helifreak.com/showthread.php?t=389097

jhunter · 03-26-2012, 12:17 PM

I already have an original Mick brace. I just wanted to know if these fit with micks brace?

AcidDrink · 03-26-2012, 01:05 PM

Quote:

Originally Posted by swalko

Xera 4530 with Jan's stiffeners. No marks on motor bell from frames after 4 flights, I hope it will stay so.

Did you get any more flights with these? I seriously consider purchasing a pair (4530 motor).

swalko · 03-26-2012, 01:28 PM

Quote:

Originally Posted by AcidDrink

Did you get any more flights with these? I seriously consider purchasing a pair (4530 motor).

Yes and pushed it really hard ... still good

.

AcidDrink · 03-27-2012, 07:39 AM

Quote:

Originally Posted by swalko

Yes and pushed it really hard ... still good

.

Thanks! That's good news.

p.s. Ordered. Might grab the new heat resistance gear for the summer as well.

02-26-2012, 07:48 AM	#41 (permalink)
Chris_M Registered Users My HF Map location Join Date: Mar 2010	I talked to heli21 and he may make a run of aluminum braces if enough people are interested. I think they were $50 each even though he only had a couple made last time. __________________

02-27-2012, 05:22 AM	#42 (permalink)
swalko Registered Users Thread Starter Join Date: Aug 2009	Friday ordered, today received . Jan's frame stiffeners look really solid, double washers as are on pictures posted previously was replaced with single 2mm thick washer. I am satisfied . Attached Thumbnails

02-27-2012, 06:18 AM	#43 (permalink)
Chris_M Registered Users My HF Map location Join Date: Mar 2010	Must be nice to get parts in just a couple days __________________

02-28-2012, 11:25 AM	#46 (permalink)
AcidDrink Registered Users Join Date: Oct 2010	Are these any good (second picture from the top, not cross braces)? I've got pair of them with my heli. Worth replacing with Jan's (well, kind of rhetoric question but still ) ? http://www.heli-innovations.de/ __________________ TDR/VBar Logo 600SX 12s VBar MSH MINI PROTOS/CGY750

02-28-2012, 02:46 PM	#49 (permalink)
jhunter Registered Users Join Date: Oct 2009	Down graded from what? 4530le? __________________ TDR, Srimok N x 2, Banshee 31, Dune!

02-28-2012, 02:25 PM	#48 (permalink)
shaman3 Registered Users My HF Map location Join Date: Jun 2010	@AcidDrink: I like the brackets from HI very much, they certainly do the trick, no need to replace them IMHO. Personally, I just don't need them any more since I have downgraded back to the 4525... (sometimes, less is more However, I believe that a cross frame bracket is more important! Daniel

03-16-2012, 02:51 AM	#51 (permalink)
swalko Registered Users Thread Starter Join Date: Aug 2009	Xera 4530 with Jan's stiffeners. No marks on motor bell from frames after 4 flights, I hope it will stay so. Attached Thumbnails

03-26-2012, 02:37 AM	#53 (permalink)
jhunter Registered Users Join Date: Oct 2009	Will these fit with the mick frame brace? Thanks __________________ TDR, Srimok N x 2, Banshee 31, Dune!

03-26-2012, 09:55 AM	#54 (permalink)
mmc205 Registered Users Join Date: Aug 2008	I run a machine shop based in PA, USA and might be willing to have the Mick style braces machined if and sell them if the pricing works out. How many people want them? Does anyone have CAD drawings of them to work from? I'd also like a "go-ahead" from Mick to do this as its his design originally. Does anyone have his email address?

03-26-2012, 12:17 PM	#57 (permalink)
jhunter Registered Users Join Date: Oct 2009	Thanks I already have an original Mick brace. I just wanted to know if these fit with micks brace? __________________ TDR, Srimok N x 2, Banshee 31, Dune!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in