Blade 180QX HD

[Suburban92]

The eflite cam holds its on!!

Thanks

is this raw footage or has it been cleaned up with software??

[ChuckTSeeker]

Originally Posted by Suburban92

The eflite cam holds its on!!

Thanks

is this raw footage or has it been cleaned up with software??

it is the raw footage edited in Sony Vegas nothing done to it though just cut up to make it a shorter video as no one wants to watch long ones

cheers chuck

[angeliak]

can someone tell me which swirch toggles the camera on a dx7???

[tntburnett]

Originally Posted by angeliak

can someone tell me which swirch toggles the camera on a dx7???

It states in the book the flap switch for dx7/7se and flaps are rev it is the same on my jr9503. Dx7s is on the trainer switch. remember quads are supposed to be in acro mode


Be blessed
Isaac

Sent from my Galaxy Nexus using Tapatalk

[angeliak]

by flap switch you mena the flight mode swiitch??

[tntburnett]

Originally Posted by angeliak

by flap switch you mena the flight mode swiitch??

Go to the screen that u see (monitor) and flip the fmode switch if aux 1 dial moves that will be the switch it will be on then you will rev that ch.

Be blessed
Isaac

Sent from my Galaxy Nexus using Tapatalk

[angeliak]

my 180qx drift a bit to the right. can i use subtrim??????

[tntburnett]

Originally Posted by angeliak

my 180qx drift a bit to the right. can i use subtrim??????

use the trim buttons not subtrim.

Be Blessed
Isaac

[angeliak]

can i use subtrim cause it seems my 180qx drifts a bit ot the right///

[tntburnett]

Originally Posted by angeliak

can i use subtrim cause it seems my 180qx drifts a bit ot the right///

No I stated above use the trim on the side of the sticks no subtrim.

Be blessed
Isaac

Sent from my Galaxy Nexus using Tapatalk

[Rob_G]

Trim is probably not the best idea because the 180 doesn't like stick input when switching to agility mode. There is a calibration mode built in to the 180, but at the moment you need to phone Horizon to have them tell you it. I've done it on my own 180 and got rid of the drift problem.

Rob

[angeliak]

rob thanks.can u tell me how to do it?

[angeliak]

are the motors for the 180qx same as the tail motor of 120sr? beacuse they seem the same!

[tntburnett]

Originally Posted by angeliak

are the motors for the 180qx same as the tail motor of 120sr? beacuse they seem the same!

The motors aren't the same they are wire on the inside different.

Be blessed
Isaac

Sent from my Galaxy Nexus using Tapatalk

[angeliak]

what is the solutuon to the right drift?

[Jim1946]

Call HH. They will guide you through the calibration procedure. Per HH rep, it will be posted on their website with the manual when they finalize it. He didn't know when that will happen.

[Sickworm]

I have heard that some people are doing FPV with the 180 & the Fat Shark
Looks like it's coked from a small Quad called the Ladybug
Has anyone heard about this too

[Sickworm]

little better sighting

[propwash]

I just got off the phone with HH. Page 13 of the included manual regarding charging of the camera battery is incorrect. Download the manual from the HH site for the correct information.

[PMV1812]

Originally Posted by angeliak

can someone show how to input the transmitter settings for the DX7/SE cause i get confused from the manual

In the program table you offer for qx180, I noticed two errors for the chosen setting for DX7s
The 1st is the allocation of swich . the train must be assigned to flaps and not to F mode.
The 2nd is at mix1. The swich must be assigned to train1 not mix0.
After this, you will have the 3 conditions for flights with your qx 180 Quad