7C and MultiGov Pro

ebonicrobot · 05-07-2011, 01:33 PM

Hello everyone I have a quick question regarding the Multigov Pro. Ive searched and searched and couldnt find anything, On Finless setup vids he used the 9303 and dx7 transmitters. I have a Futaba 7C and im trying to use the rpm selct feature. On the Align gov the rpm select uses one wire, I beleve its a yellow one. Can I do the same with the Multigov? My plan is to use one signal wire and plug it in with my battery wires in the channel 7 port since the battery only uses a black and wires leaving one port open. Im trying to configure everything with using the least amont of y connectors possible. Im already using one for my SwitchGlo for my gyro gain channel.

Jafa · 05-08-2011, 02:18 AM

Yes - that will work

AMIT MOHAN SHARMA · 05-21-2011, 08:05 AM

You can give power to any of the ports on MULTIGOV and it will power the RECIEVER as well...

05-07-2011, 01:33 PM	#1
ebonicrobot Registered Users Join Date: Aug 2008 Location: East Bay, California	7C and MultiGov Pro Hello everyone I have a quick question regarding the Multigov Pro. Ive searched and searched and couldnt find anything, On Finless setup vids he used the 9303 and dx7 transmitters. I have a Futaba 7C and im trying to use the rpm selct feature. On the Align gov the rpm select uses one wire, I beleve its a yellow one. Can I do the same with the Multigov? My plan is to use one signal wire and plug it in with my battery wires in the channel 7 port since the battery only uses a black and wires leaving one port open. Im trying to configure everything with using the least amont of y connectors possible. Im already using one for my SwitchGlo for my gyro gain channel. __________________ Avant Aurora FBL, YEP 120/700MX 510kv, Cyclic S9255 CGY750/9254 JR NEX E8, YGE 90/700MX,Cyclic DS610,BeastX/DS650 Trex 450 DFC 3S, YEP 45/450MX,Cyclic DS95i(clones), BeastX/8910a+, Frenzy 90(UNDER CONSTRUCTION) To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-08-2011, 02:18 AM	#2
Jafa Registered Users Join Date: Apr 2005 Location: Sydney Australia	Yes - that will work __________________ Rave 450 \| Lepton \| Logo 400/500/600 \| Aeolus \| Sceadu \| Freya \| Avant FX \| Raptor G4 Gryphon field rep

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-21-2011, 08:05 AM	#3
AMIT MOHAN SHARMA Registered Users Join Date: Nov 2010 Location: INDIA	You can give power to any of the ports on MULTIGOV and it will power the RECIEVER as well...