Help for trex700 with 3gx V5

[CescoP]

Hi guys I'm here to ask your opinion, I'm a new user of this fbl unit and I'm looking for suggestions.

On "Flight Mode Parameter 2" I have this values:
Elevator Flip Rte Adjustment: 20
Aileron Roll Rate adjustment: 20
Elevator travel limit: 70
Aileron travel limit: 70
Collective pitch Dampening: 0 (like radio expo?)
Cyclic pitch dampening: 0 (like radio expo?)
Collective pitch acc: 0
Cyclic pitch acc: 0

I use an Aurora9 tx and at the moment the hely radio-to-mechanical setup is:
Collective pitch: +/- 12°
Aileron pitch: +/- 6° (adjusted via tx with D/R function)
Elevator pitch: +/- 6° (adjusted via tx with D/R function)
Aileron and Elevator exp: -15%

My target is to fly my trex like my raptor50, a quite fly like a scale fly.
Any suggestion about 3GX parameter to achieve this idea?

Thanks for all your support!
CescoP.

[ticedoff8]

Post this question in the Align 3GX section.
https://www.helifreak.com/forumdisplay.php?f=222
You may get a quicker answer

[CescoP]

Already posted but no answer received!

Thanks.

[Drivelayer]

I cannot say how scale it will be but with those setting it will be alot like pushing a brick through the air. Not really agile. But as long as you don't get into trouble it should be pretty easy and stable.

I setup my first 700, not too long ago, with similar settings and it was painful to fly.. but I like fast sport and mild 3d