Register Now

backburner1955 · 11-06-2011, 04:54 PM

Nobody has discussed setups for the upcoming Rush 750. What would be the ideal setup, motor, servos, ESC, Blades and so on...

Can we get an idea as to what Austin is running?

lazor 22 · 11-06-2011, 05:41 PM

I would like to know too.. going to be getting my ESC and motor for it soon. Going to use a Hobbywing 120hv and don't know what motor. Would like to run a Neu but that's expensive. Around the 500kv range is what you want if I remember right.

eagleridge · 11-06-2011, 05:51 PM

Yesterday at the Monroe Fun fly:

BeastX
Scorpion 4035
8717's
Spectrum tail servo
Hobbywing speedie
100 flatline TC. no gov
SWE 700 fbl blades

= super stupid power.. I'd have to dumb that thing down

backburner1955 · 11-06-2011, 07:17 PM

The Align 700MX 510kv gives good power at a low price. $129.00 new open box at GrandRC. It came from a "Build Your Own Kit". 18 in stock.

http://grandrc.com/Electric-Motors-A...duct_info.html

willlig756 · 11-24-2011, 04:09 AM

I've got my setup figured out I think
Beastx
Hitech Hs 7954sh
Futaba bls256hv
Cc ice2 hv 120 or the extra ice2 hv80 I have to get started
Motor unsure hopefully Tesla

700mm Swe blades
Futaba Rx
Chrome batteries

I'm excited about this heli especially after seeing it fly in person.

helicraze · 11-24-2011, 06:41 PM

Is there any pics???

willlig756 · 11-24-2011, 09:15 PM

None close up yet. He will release them when he has everything ready.

backburner1955 · 11-24-2011, 09:42 PM

Quote:

Originally Posted by willlig756

None close up yet. He will release them when he has everything ready.

The current pics look like the canopy is a blank Align 700 canopy, is it so?...

eagleridge · 11-24-2011, 09:46 PM

Quote:

Originally Posted by willlig756

None close up yet. He will release them when he has everything ready.

Well said Gerald

As some of you know, I have been lucky enough to see a "behind the scenes" view of the designing, making, testing.etc.. Its amazing the amount of time, blood, sweat, tears, joy that has gone into the Rush750 and other products. At anytime during the week, 9 times outa 10,
when I call Charley, he is, what I like refer to it as, "talking to China"

This is not a fast process..This is not a team of Engineers and big staff..This is one man and his family and a few friend's love of all things rc helicopters. They will not settle for less than as close to perfect and affordable as they can get it. They will not release information until they are ready. Charley and family have a lot at stake in this endeavor and don't want to make any mistakes.

The time is getting close......
It WILL be worth the wait.. Mark my words

eagleridge · 11-24-2011, 09:48 PM

Quote:

Originally Posted by backburner1955

The current pics look like the canopy is a blank Align 700 canopy, is it so?...

Nope..

Btw, I got to see your custom tx strap.. very nice!!
May have to get one myself!

backburner1955 · 11-24-2011, 09:53 PM

Quote:

Originally Posted by eagleridge

Nope..

Btw, I got to see your custom tx strap.. very nice!!
May have to get one myself!

Let me know, I have lots of colors, $20 shipped to you.

backburner1955 · 11-25-2011, 12:41 AM

I have been thinking about this a bit, I would probably run the following on my Rush 750 Flybarless,

Scorpion HKIII 4035-500Kv (unless there is a kick a$$ Tesla motor)
Castle ICE2 160HV
Spektrum AR7110 w/ 2 satellites
BeastX V3.0 Flybarless
Outrage BL9180 Cyclics
Outrage BL9188 Tail
2X Chrome 6S 5000mah 40C LiPo Flight Packs
Chrome 2S 3600mah Receiver Pack
Edge 713mm Flybarless Main Blades
Edge 115mm Tail Blades

willlig756 · 11-25-2011, 01:37 AM

Quote:

Originally Posted by eagleridge

Well said Gerald

As some of you know, I have been lucky enough to see a "behind the scenes" view of the designing, making, testing.etc.. Its amazing the amount of time, blood, sweat, tears, joy that has gone into the Rush750 and other products. At anytime during the week, 9 times outa 10,
when I call Charley, he is, what I like refer to it as, "talking to China"

This is not a fast process..This is not a team of Engineers and big staff..This is one man and his family and a few friend's love of all things rc helicopters. They will not settle for less than as close to perfect and affordable as they can get it. They will not release information until they are ready. Charley and family have a lot at stake in this endeavor and don't want to make any mistakes.

The time is getting close......
It WILL be worth the wait.. Mark my words

It's a demanding yet amazing task he has taken on. For that I have the utmost respect.

plus he doesn't want clones out before he releases the real product.

wolfdown · 12-05-2011, 08:22 PM

You think the Xera 4530-500 would work?

willlig756 · 12-07-2011, 10:38 PM

Yes yes it would. That's supposed to be a stout motor

wolfdown · 12-08-2011, 11:34 PM

Are there going to be 750mm blades for this thing?

backburner1955 · 12-08-2011, 11:40 PM

Quote:

Originally Posted by wolfdown

Are there going to be 750mm blades for this thing?

I think the biggest right now is 713's right?

Charley Stephens · 12-09-2011, 09:30 PM

Yes you will soon see some blades in the 750 range

backburner1955 · 12-11-2011, 11:32 PM

So, with 713's or 750's what would the ideal motor Kv be for this heli?

backburner1955 · 12-14-2011, 01:39 AM

Edge FBL 753's coming soon...

https://readyheli.com/LE-753FBL-EDGE...n_p_39263.html

11-06-2011, 04:54 PM	#1 (permalink)
backburner1955 Registered Users Join Date: Mar 2010	Ideal Setups Nobody has discussed setups for the upcoming Rush 750. What would be the ideal setup, motor, servos, ESC, Blades and so on... Can we get an idea as to what Austin is running? __________________ *Bryan* AMA# 982814 *"No-Neck R/C"*

11-06-2011, 05:41 PM	#2 (permalink)
lazor 22 Registered Users My HF Map location Join Date: Apr 2010	I would like to know too.. going to be getting my ESC and motor for it soon. Going to use a Hobbywing 120hv and don't know what motor. Would like to run a Neu but that's expensive. Around the 500kv range is what you want if I remember right. __________________ Lincoln #HIGHONHELIS ):> Pull Hard RCHO Flying Field, Knightdale NC

11-06-2011, 05:51 PM	#3 (permalink)
eagleridge Registered Users My HF Map location Join Date: Jan 2008	Yesterday at the Monroe Fun fly: BeastX Scorpion 4035 8717's Spectrum tail servo Hobbywing speedie 100 flatline TC. no gov SWE 700 fbl blades = super stupid power.. I'd have to dumb that thing down __________________ Kevin Williams Team OFH www.onlyfinehelis.com Cyclone Blades, Scorpion Motors

11-06-2011, 07:17 PM	#4 (permalink)
backburner1955 Registered Users Thread Starter Join Date: Mar 2010	The Align 700MX 510kv gives good power at a low price. $129.00 new open box at GrandRC. It came from a "Build Your Own Kit". 18 in stock. http://grandrc.com/Electric-Motors-A...duct_info.html __________________ *Bryan* AMA# 982814 *"No-Neck R/C"*

11-24-2011, 04:09 AM	#5 (permalink)
willlig756 Registered Users My HF Map location Join Date: Dec 2010	I've got my setup figured out I think Beastx Hitech Hs 7954sh Futaba bls256hv Cc ice2 hv 120 or the extra ice2 hv80 I have to get started Motor unsure hopefully Tesla 700mm Swe blades Futaba Rx Chrome batteries I'm excited about this heli especially after seeing it fly in person. __________________ Gerald Williams Goblin Black Thunder, Goblin 500, Gaui X7, X5, NX4, X3

11-24-2011, 06:41 PM	#6 (permalink)
helicraze Registered Users Join Date: Apr 2008	Is there any pics???

11-24-2011, 09:15 PM	#7 (permalink)
willlig756 Registered Users My HF Map location Join Date: Dec 2010	None close up yet. He will release them when he has everything ready. __________________ Gerald Williams Goblin Black Thunder, Goblin 500, Gaui X7, X5, NX4, X3

11-25-2011, 12:41 AM	#12 (permalink)
backburner1955 Registered Users Thread Starter Join Date: Mar 2010	I have been thinking about this a bit, I would probably run the following on my Rush 750 Flybarless, Scorpion HKIII 4035-500Kv (unless there is a kick a$$ Tesla motor) Castle ICE2 160HV Spektrum AR7110 w/ 2 satellites BeastX V3.0 Flybarless Outrage BL9180 Cyclics Outrage BL9188 Tail 2X Chrome 6S 5000mah 40C LiPo Flight Packs Chrome 2S 3600mah Receiver Pack Edge 713mm Flybarless Main Blades Edge 115mm Tail Blades __________________ *Bryan* AMA# 982814 *"No-Neck R/C"* Last edited by backburner1955; 12-07-2011 at 10:42 PM..

12-05-2011, 08:22 PM	#14 (permalink)
wolfdown Registered Users Join Date: Oct 2009	You think the Xera 4530-500 would work? __________________ Rush 750 w/ Xera 4530-500 (12T), YGE160HV, WR S.BEC, Torq 9180/9188, AR7200BX Outrage 550 w/ Scorp 4020-1390 (13T), YGE120, CC BEC Pro, Quark, MKS BLS980, Futaba BLS451

12-07-2011, 10:38 PM	#15 (permalink)
willlig756 Registered Users My HF Map location Join Date: Dec 2010	Yes yes it would. That's supposed to be a stout motor __________________ Gerald Williams Goblin Black Thunder, Goblin 500, Gaui X7, X5, NX4, X3

12-08-2011, 11:34 PM	#16 (permalink)
wolfdown Registered Users Join Date: Oct 2009	Are there going to be 750mm blades for this thing? __________________ Rush 750 w/ Xera 4530-500 (12T), YGE160HV, WR S.BEC, Torq 9180/9188, AR7200BX Outrage 550 w/ Scorp 4020-1390 (13T), YGE120, CC BEC Pro, Quark, MKS BLS980, Futaba BLS451

12-09-2011, 09:30 PM	#18 (permalink)
Charley Stephens Registered Users Join Date: Jul 2005	Yes you will soon see some blades in the 750 range __________________ Charley Stephens

12-11-2011, 11:32 PM	#19 (permalink)
backburner1955 Registered Users Thread Starter Join Date: Mar 2010	So, with 713's or 750's what would the ideal motor Kv be for this heli? __________________ *Bryan* AMA# 982814 *"No-Neck R/C"*

12-14-2011, 01:39 AM	#20 (permalink)
backburner1955 Registered Users Thread Starter Join Date: Mar 2010	Edge FBL 753's coming soon... https://readyheli.com/LE-753FBL-EDGE...n_p_39263.html __________________ *Bryan* AMA# 982814 *"No-Neck R/C"*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in