START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Warp 360 Compass Warp 360 Model Helicopter Discussion |
|
LinkBack | Thread Tools | Display Modes |
02-22-2016, 12:18 PM | #1 (permalink) |
Registered Users
Join Date: Mar 2012
|
Boom Detail Dimensions
Hello everyone, I need the dimensions of the slot and the holes for the Warp 360 boom.
I think the forward slot is 4 x 8mm. I think the holes are 1.5mm and spaced 5mm apart (on center) with the rear-most hole 2mm (on center) from the rear edge of the boom. Can anyone confirm these dimensions for me?
__________________
NX4|Tri-Chronos|Chronos|7NT|Specter700 Saje Marvin - Citizen 125 |
Sponsored Links | |||
Advertisement |
|
02-22-2016, 02:13 PM | #2 (permalink) |
Registered Users
Join Date: Sep 2013
|
I just measured a spare and got:
Forw. slot: 3 x 9mm. But the slot is rounded and the center of the rounded end is near 8mm. Holes are 2mm, centers 10mm apart. Rearmost hole's center is 2.5mm from the rear edge.
__________________
RCHN Ctzn #191, eXo 500, T-Rex 450L Dominator, Warp 360, Blade 130X, Blade Nano CPX + various toy models |
Thread Tools | |
Display Modes | |
|
|