Register Now

MrMel · 10-29-2010, 06:27 PM

Edited since the playing field has changed:

If you run DSM2 satellites
- Run Spektrum Satellites 1 or 2 Digital Center in the VBar (will be 22ms/1024)

If you run DSMX satellites with a DSM2 radio
- Run Spektrum Satellites 1 or 2 High Resolution in the Vbar (will be 11 or 22ms/2048)
(or you can same as DSM2 satellites)

If you run DSMX satellites with a DSMX radio (DX8)
- Run Spektrum DSMX satellites 1 or 2 in the VBar (11ms/2048 with DX8)

whaleboy · 10-29-2010, 11:09 PM

Does the setup default to lowres mode? I'm running a 9303, but I'm not sure what mode I'm running. I don't remember specifically enabling a highres more...

Thanks

-David

MXRACERX43 · 10-29-2010, 11:14 PM

Do you have any idea how this may affect the Total-G FBL unit. Can you further explain the 9303 bug?

Slyster · 10-29-2010, 11:23 PM

That's a little more info here http://www.vstabi.info/forum/read.php?26,51050

KDE Direct · 10-30-2010, 10:33 AM

The problem has also been evident with Hi-Res modes and the JR 11x with my own setups. I believe the transmission protocal between the JR series radios for 2048 resolution is the same.

terrabit · 10-30-2010, 12:27 PM

How do I switch back to LowRes? There doesn't appear to be any instructions on vstabi.

MrMel · 10-30-2010, 01:05 PM

Download latest version, in the Bind screen (Receiver) there is Spektrum Satellites, that's lowres (other is specified as hires)

terrabit · 10-30-2010, 04:15 PM

Got it. Thanks!

MrMel · 10-30-2010, 08:06 PM

After 20 hours straight testing, this has been expanded to all Spektrum users.
I have edited the first post and added the official word from www.vstabi.info

gravydrive · 10-31-2010, 09:17 PM

Is it safe to run hires mode if you're only using one satellite?

MrMel · 11-01-2010, 12:32 AM

Quote:

Originally Posted by gravydrive

Is it safe to run hires mode if you're only using one satellite?

No not at all, thats even worse than running 2

TheBum · 11-01-2010, 09:48 AM

Quote:

Originally Posted by MrMel

No not at all, thats even worse than running 2

But, for a different reason. Shadowing is an issue with a single satellite, especially when CF frames are involved.

MrMel · 11-01-2010, 09:53 AM

Quote:

Originally Posted by TheBum

But, for a different reason. Shadowing is an issue with a single satellite, especially when CF frames are involved.

That too, but for the same reason as above, when you hit this "bad data transmission" using one satellite could mean 99% packet loss (managed that in a test)

TheBum · 11-01-2010, 10:15 AM

Quote:

Originally Posted by MrMel

That too, but for the same reason as above, when you hit this "bad data transmission" using one satellite could mean 99% packet loss (managed that in a test)

I though you had said that it only came into play with two satellites. This story just keeps getting curiouser and curiouser.

MrMel · 11-01-2010, 10:52 AM

Quote:

Originally Posted by TheBum

I though you had said that it only came into play with two satellites. This story just keeps getting curiouser and curiouser.

Then I wrote it unclear,

Lets say it happens 1% of the time with two satellites, it might happen 10% of the time with one satellite (just relative numbers from my testing, does not mean you will see it 1% in your environment)

wrobijns · 11-02-2010, 04:16 AM

is it a VBAR internal receiver thing or a Spektrum thing?
I'm using the full size VBAR and a seperate Spektrum reciever.
I suppose I'm fine, but confirmation would be nice :-)

MrMel · 11-02-2010, 04:35 AM

Depends on what receiver and how many total receivers (internal plus satellites)

wrobijns · 11-02-2010, 07:27 AM

Spektrum DX8
AR8000 receiver
one satelite

Black full-sized VBAR (no internal receiver)

rchaas · 11-07-2010, 12:55 AM

Happened with my 12X today. Periodic brief uncommanded control inputs. Usually goes away if I reboot the Heli.

Switched to lo res and issue gone.

MrMel · 11-07-2010, 12:59 AM

Rebooting the heli is not really the fix, rebooting the TX is.
Sometimes it looks like rebooting the heli does it but thats just coincidence

10-29-2010, 06:27 PM	#1 (permalink)
MrMel Registered Users Join Date: Apr 2005	Spektrum users - Which mode should I run? READ! Edited since the playing field has changed: If you run DSM2 satellites - Run Spektrum Satellites 1 or 2 Digital Center in the VBar (will be 22ms/1024) If you run DSMX satellites with a DSM2 radio - Run Spektrum Satellites 1 or 2 High Resolution in the Vbar (will be 11 or 22ms/2048) (or you can same as DSM2 satellites) If you run DSMX satellites with a DSMX radio (DX8) - Run Spektrum DSMX satellites 1 or 2 in the VBar (11ms/2048 with DX8) __________________ Gone fishing.. or hunting or something.. http://heli.dacsa.net Last edited by MrMel; 04-01-2011 at 03:49 PM..

10-29-2010, 11:09 PM	#2 (permalink)
whaleboy Registered Users My HF Map location Join Date: Nov 2007	Does the setup default to lowres mode? I'm running a 9303, but I'm not sure what mode I'm running. I don't remember specifically enabling a highres more... Thanks -David __________________ Trex500 sk360 \| Logo400 vbar \| Logo500 vbar \| logo 600se vbar \| Synergy N9 sk360 \| E-Aurora vbar \| Mini Protos beastX \| mcpX

10-29-2010, 11:23 PM	#4 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	That's a little more info here http://www.vstabi.info/forum/read.php?26,51050 __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

10-30-2010, 10:33 AM	#5 (permalink)
KDE Direct Registered Users Join Date: May 2006	The problem has also been evident with Hi-Res modes and the JR 11x with my own setups. I believe the transmission protocal between the JR series radios for 2048 resolution is the same. __________________ -- KDE Direct, Inc. --

10-30-2010, 12:27 PM	#6 (permalink)
terrabit Registered Users Join Date: May 2007	How do I switch back to LowRes? There doesn't appear to be any instructions on vstabi. __________________ vbar T700E v2 DFC head, Pyro 700-45L, Jive 120HV, BLS451/BLS251, Edge 693/115 vbar CF Protos Scorp 3026-880kv, Ice lite 75, 9650/BLS251, SAB 430/KBDD 82

10-29-2010, 11:14 PM	#3 (permalink)
MXRACERX43 Registered Users My HF Map location Join Date: Jan 2008	Do you have any idea how this may affect the Total-G FBL unit. Can you further explain the 9303 bug?

10-30-2010, 01:05 PM	#7 (permalink)
MrMel Registered Users Thread Starter Join Date: Apr 2005	Download latest version, in the Bind screen (Receiver) there is Spektrum Satellites, that's lowres (other is specified as hires) __________________ Gone fishing.. or hunting or something.. http://heli.dacsa.net

10-30-2010, 04:15 PM	#8 (permalink)
terrabit Registered Users Join Date: May 2007	Got it. Thanks! __________________ vbar T700E v2 DFC head, Pyro 700-45L, Jive 120HV, BLS451/BLS251, Edge 693/115 vbar CF Protos Scorp 3026-880kv, Ice lite 75, 9650/BLS251, SAB 430/KBDD 82

10-30-2010, 08:06 PM	#9 (permalink)
MrMel Registered Users Thread Starter Join Date: Apr 2005	After 20 hours straight testing, this has been expanded to all Spektrum users. I have edited the first post and added the official word from www.vstabi.info __________________ Gone fishing.. or hunting or something.. http://heli.dacsa.net

10-31-2010, 09:17 PM	#10 (permalink)
gravydrive Registered Users My HF Map location Join Date: Nov 2007	Is it safe to run hires mode if you're only using one satellite?

11-02-2010, 04:16 AM	#16 (permalink)
wrobijns Registered Users Join Date: May 2007	is it a VBAR internal receiver thing or a Spektrum thing? I'm using the full size VBAR and a seperate Spektrum reciever. I suppose I'm fine, but confirmation would be nice :-)

11-02-2010, 04:35 AM	#17 (permalink)
MrMel Registered Users Thread Starter Join Date: Apr 2005	Depends on what receiver and how many total receivers (internal plus satellites) __________________ Gone fishing.. or hunting or something.. http://heli.dacsa.net

11-02-2010, 07:27 AM	#18 (permalink)
wrobijns Registered Users Join Date: May 2007	Spektrum DX8 AR8000 receiver one satelite Black full-sized VBAR (no internal receiver)

11-07-2010, 12:55 AM	#19 (permalink)
rchaas Registered Users Join Date: Apr 2004	Happened with my 12X today. Periodic brief uncommanded control inputs. Usually goes away if I reboot the Heli. Switched to lo res and issue gone. __________________ Robbie

11-07-2010, 12:59 AM	#20 (permalink)
MrMel Registered Users Thread Starter Join Date: Apr 2005	Rebooting the heli is not really the fix, rebooting the TX is. Sometimes it looks like rebooting the heli does it but thats just coincidence __________________ Gone fishing.. or hunting or something.. http://heli.dacsa.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in