325 to 350

[r1ride]

I have 325 blades on my Rave and would like to go up to 350 blades.
Do I have to change anything or could I just put them on and go fl?.
I have the Next -D (2221-6) motor on 3S.

[Buzzin Brian]

350's are more suited to a 4s setup. But to answer your question, the model itself will accept 350mm blades as it is stock. No mods are required.

Brian

[r1ride]

Originally Posted by Buzzin Brian

350's are more suited to a 4s setup. But to answer your question, the model itself will accept 350mm blades as it is stock. No mods are required.

Brian

Thanks Brian

So I don't have to change the motor or pinion.

[Buzzin Brian]

It will likely work, but the longer and heavier blades will load everything more. Which can heat things up some, and reduce flight times. Like I said, they are really more well suited to a 4s setup. But I do know guys running 350s on 3s machines.

Brian

[merlin3]

350s work perfect on the 3s with 6 motor and is my preferred setup.

[tomra]

Originally Posted by merlin3

350s work perfect on the 3s with 6 motor and is my preferred setup.

What ESC and pinion size do you run?