Register Now

bungie · 03-11-2012, 03:21 AM

I have the KDS 450QS (not the Innova)
I'm chasing a tailboom part number QS-017
The sites that sell KDS parts keep trying to sell me the 1102-QS thats the boom for the SD, its 15mm too short.
I got two in for the Innova model and the are 25mm too short

The correct size is Φ13xΦ14x380mm.

Any ideas or anyvody seen one around ??

Danny_Swe · 03-16-2012, 11:08 AM

I have found it in England but they seem to have problem with supply
http://www.rcmods.co.uk/qs017-tail-boom-p-7589.html

bungie · 03-18-2012, 01:49 AM

Yeah, tried them

Danny_Swe · 03-18-2012, 02:44 AM

is that the size of the MiniProtos boom maybe? Or you can buy a 14 mm tube and cut it to the preferred length

BaconWrap · 03-18-2012, 05:27 AM

Perhaps:
http://dealervip.com.ar/450qs.htm - #18

I also looked around trying to find the part, only found the above - I suspect at this point that Danny Swe is correct and you have two options, make your own - or convert the tail length to a different model.

Hope this helped,
Dave

Rotary Lad · 03-20-2012, 07:05 PM

Not sure if they ship overseas, but Century UK are very good for KDS parts.

http://www.centuryuk.com/Spares/Heli...res/KDS-450-QS

03-11-2012, 03:21 AM	#1 (permalink)
bungie Registered Users My HF Map location Join Date: Dec 2011	450QS parts, tail boom I have the KDS 450QS (not the Innova) I'm chasing a tailboom part number QS-017 The sites that sell KDS parts keep trying to sell me the 1102-QS thats the boom for the SD, its 15mm too short. I got two in for the Innova model and the are 25mm too short The correct size is Φ13xΦ14x380mm. Any ideas or anyvody seen one around ??

03-16-2012, 11:08 AM	#2 (permalink)
Danny_Swe Registered Users My HF Map location Join Date: Oct 2010	I have found it in England but they seem to have problem with supply http://www.rcmods.co.uk/qs017-tail-boom-p-7589.html __________________ 550E, X3 \| BeastX, YGE, DX8 http://dannesholk.se/rc.shtml

03-18-2012, 02:44 AM	#4 (permalink)
Danny_Swe Registered Users My HF Map location Join Date: Oct 2010	is that the size of the MiniProtos boom maybe? Or you can buy a 14 mm tube and cut it to the preferred length __________________ 550E, X3 \| BeastX, YGE, DX8 http://dannesholk.se/rc.shtml

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-18-2012, 01:49 AM	#3 (permalink)
bungie Registered Users Thread Starter My HF Map location Join Date: Dec 2011	Yeah, tried them

03-18-2012, 05:27 AM	#5 (permalink)
BaconWrap Registered Users Join Date: Jan 2012	Perhaps: http://dealervip.com.ar/450qs.htm - #18 I also looked around trying to find the part, only found the above - I suspect at this point that Danny Swe is correct and you have two options, make your own - or convert the tail length to a different model. Hope this helped, Dave

03-20-2012, 07:05 PM	#6 (permalink)
Rotary Lad Registered Users Join Date: Jun 2011	Not sure if they ship overseas, but Century UK are very good for KDS parts. http://www.centuryuk.com/Spares/Heli...res/KDS-450-QS

Register Now

Log-in