Register Now

toonttm · 10-22-2011, 09:22 PM

Finally put 2 paks in today incident free! nice hover and some forward flight and autos..it just floated down, all in a good breeze as well. Tail seems to need a constant right input so I'll try and trim it next time.

Murphys law - I just bought 5 sets of blades, 5 feathering shafts, 5 main shafts, 2 booms, 2 skid sets etc and I didn't need any of it!

Overall very impressed after battling a HoneyBee FP. It almost reminded me of the mSR, except way more responsive and a more than a little itimidating

Was tempted to try things I do on the sim but somehow managed to restrain myself, I tend to rush things at the end which often leads to disaster, lol.

Onwards and upwards, holiday tomorrow so will try and get 4 packs done then start thinking about starting some circuits. (after of course checking every nut and bolt)

horigan · 10-22-2011, 09:35 PM

Sweet!

Deet · 10-22-2011, 10:12 PM

just nudge the tail servo a few mm back and forwards along the boom to tune out the drift, nice to hear you got it in the air

flerpie · 10-22-2011, 10:18 PM

Quote:

Originally Posted by toonttm

Murphys law - I just bought 5 sets of blades, 5 feathering shafts, 5 main shafts, 2 booms, 2 skid sets etc and I didn't need any of it!

You will

ugoferri · 10-22-2011, 11:58 PM

Hahaha u never know when u r gonna need the spare parts! I love the feelin' of a flight with no crashes !!

Sent from my BlackBerry 9650

10-22-2011, 09:22 PM	#1 (permalink)
toonttm Registered Users Join Date: Feb 2011	Finally success! Finally put 2 paks in today incident free! nice hover and some forward flight and autos..it just floated down, all in a good breeze as well. Tail seems to need a constant right input so I'll try and trim it next time. Murphys law - I just bought 5 sets of blades, 5 feathering shafts, 5 main shafts, 2 booms, 2 skid sets etc and I didn't need any of it! Overall very impressed after battling a HoneyBee FP. It almost reminded me of the mSR, except way more responsive and a more than a little itimidating Was tempted to try things I do on the sim but somehow managed to restrain myself, I tend to rush things at the end which often leads to disaster, lol. Onwards and upwards, holiday tomorrow so will try and get 4 packs done then start thinking about starting some circuits. (after of course checking every nut and bolt)

10-22-2011, 09:35 PM	#2 (permalink)
horigan Registered Users My HF Map location Join Date: Sep 2009	Sweet! __________________ Rich Synergy E5S VBar Synergy 516 VBar Neo

10-22-2011, 10:12 PM	#3 (permalink)
Deet Registered Users My HF Map location Join Date: Dec 2009	just nudge the tail servo a few mm back and forwards along the boom to tune out the drift, nice to hear you got it in the air __________________ Dave Goblin 500, Vbar, BLS153, BLS251, Kontronic Jive & Piro MutliWiiCopter Scarab Stealth Armour,Scarab Stealth Reconn V3, Scarab TriiKopta, Scarab Octa, Scarab Vampire

10-22-2011, 11:58 PM	#5 (permalink)
ugoferri Registered Users Join Date: Feb 2011	Hahaha u never know when u r gonna need the spare parts! I love the feelin' of a flight with no crashes !! Sent from my BlackBerry 9650 __________________ SAB Factory Team -Team MKS - Team Jeti Team Optipower - Team Canomod

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in