Dylan package arrived!

[anjoi666]

was a nice rainy day to get my parts from astroid!
all went smooth really love how all the parts are made and go together! well worth the measly moneys hes asking!
hopefully get my hands on a CF RX cage in the future !
Thanks again Dylan!

[anjoi666]

After flying a few hover packs and noticing the heat up of my battery's and esc getting very warm....
2 things i found that fixed my issues.
1. First off, i used Hp05s motor screws... bad idea... grinded my main gear on the head of one screw.... still using it but it was obv a reason for heat.
2. i didnt quite realize that when cutting stock frame i had a couple minor nicks of plastic still to cut to make the mount flat.... so after attempting the first thing to fix, then going outdoor for 3d, bad time with it... i took a closer look..
always check this if its a stock cut up frame and brushless with the dylan brace!
otherwise you will end up having some kind of engine cog and things wont be too great.
now things are fixed, temps still getting warm but not as hot for sure. full batt and its warm before was 1-2 mins to hot...
thats all for now