 |
START HERE |
|
| Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
|
|
|
Unregistered
|
||||||
|
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
05-10-2015, 02:11 PM
|
#1 (permalink) |
|
Registered Users
Join Date: Jan 2012
|
Larger pinion
I can't only get a max of 2000 HS with the stock 12T pinion and 112T main gear. I'm using a Quantum 4530-500 (10 magnetic poles) on a CC Phoenix Edge HV 160 ruining at 12s. I couldn't find a higher T count pinion on Alees's new web site. I know I'll want more HS out of this as I run 2100 on my G770. Does anyone else make one that will work with this heli?
__________________
[B]Phoenix Sim V5.5, Spektrum DX9, PowerLab 8, iKon 2 HD, SAB Goblin 770 |
|
|
| Sponsored Links | |||
|
Advertisement |
|
||
|
05-10-2015, 02:31 PM
|
#2 (permalink) |
|
Registered Users
Join Date: Feb 2011
|
a 13t trex 600 pinion will work.
|
|
|
|
|
05-10-2015, 02:35 PM
|
#3 (permalink) |
|
Registered Users
Thread Starter
Join Date: Jan 2012
|
Larger pinion
How about a 15t?
__________________
[B]Phoenix Sim V5.5, Spektrum DX9, PowerLab 8, iKon 2 HD, SAB Goblin 770 |
|
|
|
|
05-10-2015, 02:41 PM
|
#4 (permalink) |
|
Registered Users
Join Date: Feb 2011
|
that I don't know. wouldn't want to steer you wrong. I use the 13t so i know it works. I've got my rpm at 2200 in the cc 120hv.
|
|
|
|
|
05-10-2015, 02:50 PM
|
#5 (permalink) |
|
Registered Users
Thread Starter
Join Date: Jan 2012
|
It will have to do. Thx
__________________
[B]Phoenix Sim V5.5, Spektrum DX9, PowerLab 8, iKon 2 HD, SAB Goblin 770 |
|
|
|
|
05-13-2015, 03:30 AM
|
#6 (permalink) |
|
Registered Users
Join Date: Jun 2012
|
MrMel and Castlelink calculator with 500kv/ 12T should give you about governed 2100rpm without minimal gov headroom error. 13T about 2200rpm
Align Motor Slant Thread Pinion Gear 13T 600E Pro/700E/800E [H70G009XXW]
__________________
Diabolo 700, Oxy 5 Nitro, OMP M2, Futaba |
|
|
|
|
05-13-2015, 10:29 AM
|
#7 (permalink) |
|
Registered Users
Join Date: Feb 2012
Location: Grande Prairie, Alberta Canada
|
The 13 tooth pinion is what you are looking for, 15 tooth is not the answer!
Pic below is of a beautiful stainless gear, almost the same # as DanNcN posted so I'm not positive if it's the same or not. Anyway, it's a very nice gear! Steve
__________________
Nano CPX || 130X || 230S II 450 3D converted to 450X || 360CFX || 480 Fusion II 550X || Oxy 5 MEG || ALeeS Rush 700 Evolution || Goblin 770 Sport  'My flight style, determines my crash style"
|
|
|
|
|
05-13-2015, 11:04 AM
|
#8 (permalink) |
|
Registered Users
Thread Starter
Join Date: Jan 2012
|
Yep. I bought one of these. It arrived yesterday.
__________________
[B]Phoenix Sim V5.5, Spektrum DX9, PowerLab 8, iKon 2 HD, SAB Goblin 770 |
|
|
|
|
05-13-2015, 11:26 AM
|
#9 (permalink) |
|
Registered Users
Join Date: Feb 2012
Location: Grande Prairie, Alberta Canada
|
Is it the heavy polished stainless version?
__________________
Nano CPX || 130X || 230S II 450 3D converted to 450X || 360CFX || 480 Fusion II 550X || Oxy 5 MEG || ALeeS Rush 700 Evolution || Goblin 770 Sport 'My flight style, determines my crash style"
|
|
|
|
|
05-13-2015, 12:02 PM
|
#10 (permalink) |
|
Registered Users
Thread Starter
Join Date: Jan 2012
|
I think so?
__________________
[B]Phoenix Sim V5.5, Spektrum DX9, PowerLab 8, iKon 2 HD, SAB Goblin 770 |
|
|
|
|
05-14-2015, 12:53 AM
|
#11 (permalink) |
|
Registered Users
Join Date: Jun 2012
|
Both gears will work, I bought my rush over geared with a 14T SS and replaced it with a 12T I mentioned earlier. After a few flights the rush lost power and auto'd down. The aluminum too short pinion gear set screw at the motor shaft flat spot stripped allowing the pinion to spin so I installed longer set screws.
__________________
Diabolo 700, Oxy 5 Nitro, OMP M2, Futaba |
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
