Motor question.

[venom56]

Just being curious, I was wondering does anyone know the specifications of the mikado motor on the Xxtreme.

[jamin_00]

Cant find any info on it anywhere??

[dahld]

Well, it's basically a rewound 5035 series for use with the XXtreme's gearing (380kv with the 14S input voltage). If you go to Scorpions web site and checkout the 5035 series (there are two...one 500kv for 12S, and the other 410kv for 14S), I think much of the specs would be similar.

(-: Dave

[jamin_00]

For the 410Kv


Stator Diameter 50 mm (1.56 in)
Stator Thickness 35 mm (1.37 in)
No. of Stator Arms 12
Magnet Poles 10
Motor Wind 9 Turn Delta
Motor Wire 24-Strand 0.33 mm
Motor Kv 410KV RPM / Volt
No-Load Current (Io/10V) 2.12 Amps
Motor Resistance (Rm) 0.014 Ohms
Max Continuous Current 105 Amps
Max Continuous Power 5100 Watts
Weight 670 Grams (23.63 oz)
Outside Diameter 61.0 mm (2.4 in)
Shaft Diameter 5.98 mm (0.23 in)
Body Length 66.0 mm (2.59 in)
Overall Shaft Length 116.5 mm (4.59 in)
Max Lipo Cell 14s
Peak Current 145A (5 seconds)
Peak Power 7000 Watts (5 seconds)
Motor Timing 5deg
Drive Frequency 8kHz

[twoleftthumbs]

The only mention of that exact motor i could find was here .. http://www.world-of-heli.de/antrieb-...-5035-380.html

Hope it helps

[Jays200]

Except I think our motors have 10 poles

[lar_daniel]

i dont understand 5035 410 10 poles
5035 380 8 poles

is this ok??????????

[dahld]

I've been told from day one by everybody who should know, that the 5035-380kv motor is a 10 pole motor.

(-: Dave

[venom56]

That did help thanks for the help. I was a little worried about the 8 pole thing.

[jamin_00]

Lets hope so hey as we all setting up the vbar gov based on it being 10 pole

[MrMel]

It's 10 pole.