SD 10g with 3g on a gaui 425

[bk479]

Hello I am haveing problems with this set up have been for months i feel lik this

OK i have done the finless bob on the servo horns. all the belcranks are 90 and the swash is level. today i went to the dir mode on the 3g unit and the swash moves great. step 2 set the EL limits and step 4 the AI limits. the final results are the swash isn't moving level up and down. now it looks like the 2 front servoes are moving more than the EL servo or the EL servo isnt moving enough. also at 0 pitch mid-stick the blades are facing to the nose and tail. when i move the EL stick up and down you can see the blades moving. when you shouldn't see any movement at all. and no there isn't any mix on in the radio, i can start with a new model and it does the same thing.

epa all at 100
D/R all at 100
cepa all at 100

swash
-60 ----- +65
+30 - 60 +65
+30 +60 +65
Any help would be great Thanks Brian

I feel like doing this to the radio and 3g