START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Reflex Flight Sim Reflex Simulator Talk |
|
LinkBack | Thread Tools | Display Modes |
12-14-2007, 06:57 PM | #1 (permalink) |
Join Date: Nov 2007
|
Reflex Sim Futaba cable adapter
I have a reflex sim cable that comes in two parts. I am having a lot of trouble with the short cable in the picture with the square connector for a Futaba T7CAP Transmitter. There is a bad connection that I can't seem to fix. I do not believe it's the transmitter connection as I've tested that thoroughly. I've also opened the square connector and re-soldered the connections but no help.
Has anyone else had the same problem? is there a resolution to the problem or better cable supplier? |
Sponsored Links | |||
Advertisement |
|
12-16-2007, 11:57 AM | #2 (permalink) |
Registered Users
|
Eric the Reflex cable should be OK although I although ther is only one cable that plugs into the USB dongle. I could imagine it could easily have a broken wire inside as they do tend to get dragged about a bit. What is your exact problem the TX should turn itself on if you plug the lead in if not then you have a problem and maybe a faulty dongle that Reflex will replace Free of Charge.
Do you have a picture of it ?
__________________
T-Rex450SE, FBL Align 3G system T-Rex600E, FBL Align 3G system T-Rex700E, FBL Align 3G system Hirobo Quark & a few PLANKZ, Extra 260, Akromaster... Yamaha YZF-R1 |
Thread Tools | |
Display Modes | |
|
|