Register Now

Rc_Cam · 08-01-2010, 09:14 PM

Is it possible to run the fbl 700e on a 6 chanel like the dx6i or would I need at least a 7 chanel? I'm thinking on ither getting a JR X9503 or going big with a 700.

Krusty Blade · 08-02-2010, 12:28 AM

DX6i will work perfect on the 700E, you only need 6 channels.

Rc_Cam · 08-02-2010, 10:07 AM

Thanks. I was more woried about the amount of chanels you need to run the 3g setup.

Krusty Blade · 08-02-2010, 10:22 AM

The 7th channel is more for the nitro guys.

Rc_Cam · 08-02-2010, 04:32 PM

excelent thankyou guys i wasnt sure if you needed a couple of gains for the 3 axis gyro, but now i know.

JoieC · 08-02-2010, 07:06 PM

I had the same question about the DX6i, Can you tell me if the DX6i will work with the AR7100? I would like to use that reciever with my 700e (just ordered both) because of the built in voltage regulator (no BEC needed)

Krusty Blade · 08-03-2010, 10:54 AM

Yes it does, although you wont get the full benefit of the receiver. This is from the manual.
All sizes of nitro powered helicopters
500-class and larger electric helicopters
Compatible with all Spektrum™ and JR® DSM2™ full range transmitters including:
Spektrum DX6i (RevLimit function not available as only six channels are present)
Spektrum DX7
JR X9303 2.4
JR12X
Note: Not compatible with Spektrum’s DX6 parkflyer system (DSM)

08-01-2010, 09:14 PM	#1 (permalink)
Rc_Cam Registered Users Join Date: Jun 2010	Dx6i on 700e 3g? Is it possible to run the fbl 700e on a 6 chanel like the dx6i or would I need at least a 7 chanel? I'm thinking on ither getting a JR X9503 or going big with a 700.

08-02-2010, 12:28 AM	#2 (permalink)
Krusty Blade Registered Users My HF Map location Join Date: Sep 2008	DX6i will work perfect on the 700E, you only need 6 channels. __________________ "C'est en faisant n'importe quoi qu'on devient n'importe qui"

08-02-2010, 10:22 AM	#4 (permalink)
Krusty Blade Registered Users My HF Map location Join Date: Sep 2008	The 7th channel is more for the nitro guys. __________________ "C'est en faisant n'importe quoi qu'on devient n'importe qui"

08-03-2010, 10:54 AM	#7 (permalink)
Krusty Blade Registered Users My HF Map location Join Date: Sep 2008	Yes it does, although you wont get the full benefit of the receiver. This is from the manual. All sizes of nitro powered helicopters 500-class and larger electric helicopters Compatible with all Spektrum™ and JR® DSM2™ full range transmitters including: Spektrum DX6i (RevLimit function not available as only six channels are present) Spektrum DX7 JR X9303 2.4 JR12X Note: Not compatible with Spektrum’s DX6 parkflyer system (DSM) __________________ "C'est en faisant n'importe quoi qu'on devient n'importe qui"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-02-2010, 10:07 AM	#3 (permalink)
Rc_Cam Registered Users Thread Starter Join Date: Jun 2010	Thanks. I was more woried about the amount of chanels you need to run the 3g setup.

08-02-2010, 04:32 PM	#5 (permalink)
Rc_Cam Registered Users Thread Starter Join Date: Jun 2010	excelent thankyou guys i wasnt sure if you needed a couple of gains for the 3 axis gyro, but now i know.

08-02-2010, 07:06 PM	#6 (permalink)
JoieC Registered Users Join Date: Mar 2008	I had the same question about the DX6i, Can you tell me if the DX6i will work with the AR7100? I would like to use that reciever with my 700e (just ordered both) because of the built in voltage regulator (no BEC needed)

Register Now

Log-in