START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Outrage Fusion 50 Outrage Fusion 50 Electric Helicopter Factory Support Forum |
|
LinkBack | Thread Tools | Display Modes |
05-07-2011, 05:32 PM | #1 (permalink) |
Registered Users
|
Best head speed/ gearing 12, 13 or 14
I am curious about what the best head speed is for the fusion? I am not too concerned about flight time.
I am running on 8S with a 4025-890 and trying to find the right HS. My pinion choices are 12/13/14 and 603 or 623 EDGE blades. Hopefully some team guys with experience can chime in. Thanks |
Sponsored Links | |||
Advertisement |
|
05-07-2011, 06:00 PM | #2 (permalink) |
Registered Users
|
Steven and Jason are running 2150 HS
__________________
Clyde Fox Port Charlotte, FL. Team Rotorworkz/Outrage |
05-08-2011, 07:02 AM | #3 (permalink) |
Registered Users
|
We still run ours at about 2300 rpm. Issue is that I already use a 12t pinion. So I will not bring it down much further. However pinion all depends on your application. So you have to check on head speed at throttle input and adjust pinion based on that.
|
05-08-2011, 09:41 AM | #5 (permalink) |
Registered Users
|
We've run both the SWE 630's and currently have a set of SAB 620's, saw them both fly yesterday a couple of batteries and the SAB's with a bit wider cord are responding very nicely on the FBL system
__________________
Clyde Fox Port Charlotte, FL. Team Rotorworkz/Outrage |
05-08-2011, 10:59 AM | #6 (permalink) |
Registered Users
Join Date: Jan 2009
Location: NorCal
|
Have You tried Edge 623 fbl's? I hated them on my Logo, but I hope there is some magic on the Fusion. Hard to say what I didn't like, but overall I couldn't fly the heli as hard around the limits like I could with 603's. Also the 603's just had a better "bite".
|
05-08-2011, 01:36 PM | #7 (permalink) |
Registered Users
Thread Starter
|
I'm selling my Edge 623 FBL, if you're interested PM me.
|
05-08-2011, 01:38 PM | #8 (permalink) |
Registered Users
Thread Starter
|
Thanks, I am going to run a 12t with curves instead of 13t and GOV.
|
05-08-2011, 04:03 PM | #9 (permalink) |
Registered Users
Join Date: Mar 2008
|
12s setup 2150HS with 12t using Kontronik HV80 running Edge 623FBL ..Flys Beautiful 5 minute flights with TP 65c 3300's
__________________
Cheers, Glenn Outrage Fusion 50 FBL SK720 12s Xera 4025-560,Kon.HV 80 ,JR8717,OR 9088 on 6v TP 6s 65c 3300's Trex 700CHP FBL SK720 MX510,Kon HV 80, JR 8717,OR 9188, 6v, TP 6s 45c 4400's |
Thread Tools | |
Display Modes | |
|
|