Motor is Bogging

[rc247]

My motor keeps bogging. I get +-11 so I'm not sure what's going on. I think my motor is going. I have one of those Hyperion Atlas ESC's w/ governing mode so I don't know if I have that set right. The motor is a Trex 430xl w/ a 13t pinion. Should I throw the 15t back on? Is that motor "tired"? Or do I not have the ESC setup right? It flys great until I have to drastically have to change the pitch. IDK. Any help!?!?

[Butuz]

It could be a few things but I think your motor should do the job. It could be that the govenor is not a good one (or not set up right), or it could be your batteries (how old are they?).

Butuz

[eDeK]

What packs?
Try w/o governor at 100 flat. If this motor has 3700kv,try 12t pinon,you dont need 13t till you fly harder 3D.

If packs are enough,not old,and if it boggs even at 100% flat,I'd say,work on your timing or try again with different ESC and motor.

[rc247]

Hey thanks guys for the input. I will look into them. I'm pretty sure the ESC is good. I don't know If you can not use it without governing mode. My options are governing with elec or gas or airplane mode. IDK but it may also be my packs. They are the plain looking Zippys. They aren't that old. <30 flights on them.