Register Now

freestyledork · 04-04-2012, 08:29 PM

With lots to learn..
been at it for about 2 years now. I finally feel like my flying is to a point where I can start doing some AP work. I went through the ranks learning how to fly starting off with msr, then blade ccp2, then blade 4503D, also had to get the MCPX. I've only flown with a GoPro so far but looking to build a DSLR rig this summer to use with a 600 heli.

I've been a member here for over a year constantly reading and learning different techniques. I'm at the point where I have some questions I feel wont be to out of line.

This is my current part list to get a working AP ship worthy of the name.

Kontronik Jive 60+ HV Brushless ESC (V9) - $350
Xera 4025/2.5y-670 Motor - $230
CHAOS 600 PRO LIMITED EDITION FLYBARLESS KIT - TORQUE TUBE - $350
Skookum SK720 6 Axis Flybarless System w/o Power Bus - $399
Trex 600E 2XPT - $559.95
ProTek R/C 6S "Supreme Power" Li-Poly 70C Battery Pack (22.2V/2900mAh) - $135
Radio - $400-500
Servos - $400-500

Now I'm self taught and don't have much mentoring in the area if any. Any advice will go a long way.

As for my flying level, I never learned any 3D. I don't feel its necessary to do AP, is this an accurate statement? I can fly my 450 in circle circuits, square circuits, figure 8s, controlled hovering, backwards flying and backwards circle, square, figure 8 circuits.

I'm not looking for a hand out just some guidance. Let me know what you think I should focus on. I'll keep this thread updated with my progress. Thanks

Here is a shot from my first ever attempt at AP.

daruq7 · 04-05-2012, 10:19 AM

What camera will you be planning to fly with? What payload do you need?

freestyledork · 04-05-2012, 11:17 AM

I currently have a canon 60D, but I plan on getting a t2i or GH2 for use with the heli. From what I researched the GH2 video quality is superior to the t2i. Also weighs less at right under 400grams. (13.82oz) Different lenses weighing around 1-2 lbs. The camera gimbal claims to weight 1.5 lbs. With other various electronics I would say a total payload would be around 5lbs.

outofphase · 04-07-2012, 12:28 PM

The GH2 will not shoot with a live feed so you will not be able to shoot video and transmit the feed down to the ground to set up your shots. Just an FYI

freestyledork · 04-09-2012, 02:49 PM

Thanks Outofphase for that info.. That will definitely be a minus for the camera.

No one else has any comments on the set up above?

hellafilming · 04-09-2012, 09:00 PM

If you go with the skookum get the power bus..its a must have i promise...kinda.

freestyledork · 04-15-2012, 10:41 PM

Thanks for the advice. Sound like everything else is up to par?

04-04-2012, 08:29 PM	#1 (permalink)
freestyledork Registered Users My HF Map location Join Date: Jul 2011	Joining the AP club With lots to learn.. been at it for about 2 years now. I finally feel like my flying is to a point where I can start doing some AP work. I went through the ranks learning how to fly starting off with msr, then blade ccp2, then blade 4503D, also had to get the MCPX. I've only flown with a GoPro so far but looking to build a DSLR rig this summer to use with a 600 heli. I've been a member here for over a year constantly reading and learning different techniques. I'm at the point where I have some questions I feel wont be to out of line. This is my current part list to get a working AP ship worthy of the name. Kontronik Jive 60+ HV Brushless ESC (V9) - $350 Xera 4025/2.5y-670 Motor - $230 CHAOS 600 PRO LIMITED EDITION FLYBARLESS KIT - TORQUE TUBE - $350 Skookum SK720 6 Axis Flybarless System w/o Power Bus - $399 Trex 600E 2XPT - $559.95 ProTek R/C 6S "Supreme Power" Li-Poly 70C Battery Pack (22.2V/2900mAh) - $135 Radio - $400-500 Servos - $400-500 Now I'm self taught and don't have much mentoring in the area if any. Any advice will go a long way. As for my flying level, I never learned any 3D. I don't feel its necessary to do AP, is this an accurate statement? I can fly my 450 in circle circuits, square circuits, figure 8s, controlled hovering, backwards flying and backwards circle, square, figure 8 circuits. I'm not looking for a hand out just some guidance. Let me know what you think I should focus on. I'll keep this thread updated with my progress. Thanks Here is a shot from my first ever attempt at AP.

04-07-2012, 12:28 PM	#4 (permalink)
outofphase Registered Users My HF Map location Join Date: Mar 2010	The GH2 will not shoot with a live feed so you will not be able to shoot video and transmit the feed down to the ground to set up your shots. Just an FYI __________________ www.precisionaerial.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-05-2012, 10:19 AM	#2 (permalink)
daruq7 Registered Users Join Date: Sep 2010	What camera will you be planning to fly with? What payload do you need?

04-05-2012, 11:17 AM	#3 (permalink)
freestyledork Registered Users Thread Starter My HF Map location Join Date: Jul 2011	I currently have a canon 60D, but I plan on getting a t2i or GH2 for use with the heli. From what I researched the GH2 video quality is superior to the t2i. Also weighs less at right under 400grams. (13.82oz) Different lenses weighing around 1-2 lbs. The camera gimbal claims to weight 1.5 lbs. With other various electronics I would say a total payload would be around 5lbs.

04-09-2012, 02:49 PM	#5 (permalink)
freestyledork Registered Users Thread Starter My HF Map location Join Date: Jul 2011	Thanks Outofphase for that info.. That will definitely be a minus for the camera. No one else has any comments on the set up above?

04-09-2012, 09:00 PM	#6 (permalink)
hellafilming Registered Users Join Date: Oct 2011	If you go with the skookum get the power bus..its a must have i promise...kinda.

04-15-2012, 10:41 PM	#7 (permalink)
freestyledork Registered Users Thread Starter My HF Map location Join Date: Jul 2011	Thanks for the advice. Sound like everything else is up to par?

Register Now

Log-in