Register Now

kyles · 06-18-2010, 05:24 PM

Alright, as most of the stories go: I got into the hobby and realized that it was out of my skill level and can not afford to repair the helicopter as I learn to fly. I bought the 450 used from the LHS and bound it to my dx7. I enjoy flying but can not dedicate the time necessary to succeed in this wonderful sport. I think ill stick to my fixed wing flying for now.

This is a Trex 450se V2.
Gy401 gyro
Futaba S9257 tail servo
un-known main servos
Ar6200 Spektrum receiver
Gorilla gear main gear
Align carbon fiber main rotor blades
Align motor and speed controller
1800mah Hyperion Litestorm VX battery

any other questions feel free to ask.

I am asking $350USD o.b.o. plus shipping
Kyle

kyles · 06-20-2010, 07:07 AM

i have one more set of carbon blades and a bag of extra parts. i also have a thunderpower 2250mah battery pack that goes with. i have a triton eq charger that is also available if we negotiate a price.
make realistic offers

kyles · 06-29-2010, 11:56 AM

Is my price too high? Is there not a market for the Trex 450 any more? I need to sell this. Make some offers.
Kyle

SoarWest · 06-29-2010, 07:30 PM

Is it possible to read what the main servos are? What colors are the wires? It appears the nose has some kind of mod... to hold the battery tray and connect it to the lower plate? A clear pic of the head and tail would help. THanks.

kyles · 06-29-2010, 09:02 PM

sale pending

kyles · 07-13-2010, 07:46 PM

Sale did not go through, it was a bogus offer. I will do $300 shipped to any of the 48 continental States. Any other location will have to be discussed.

darmie · 07-15-2010, 09:25 PM

As Sorewest was asking about, can you offer some information about the battery holder? I've been looking at getting a blade, but If I can find a radio, I'd be interested.. Thanks..//

kyles · 07-15-2010, 09:38 PM

The battery holder is something I built out of thin fiberglass sheet and painted black. I am a structural engineer and thought that this would reduce the possibility of having the battery damaged on an impact. The battery mount can be removed and the old battery plate can be installed. The side frame screws hold the battery mount that I fabricated in place. The rotor head is all aluminum as is the tail rotor head..

Bid Doctor · 07-16-2010, 09:19 AM

Sent a PM. You may have a sale if you can answer question in PM.

kyles · 07-16-2010, 09:58 AM

I have had a few questions about the servos, rotor head and battery holder. Here are some updated pictures.

kyles · 07-16-2010, 10:00 AM

Here are some more pictures.

kyles · 08-12-2010, 08:57 AM

still for sale. $300 shipped in the USA.

minimalitia1 · 08-12-2010, 08:14 PM

i like your battery tray mod. looks like it supports the b attery quiet well. i know my factory carbon tray flexes like a beast and will sometimes cause my battery straps to come undone...

anyways ab your servos they look like hitec's to me. probly HS65HB's or HS65MG's.

B2TheEYo · 08-13-2010, 01:42 AM

Very cool mod, your abilities are very valuable in this industry improving designs and possibly even making new ones, I think you should stick at it if you can.

The servos are Hitec 65's, I can't say which ones as I cannot see through the cases. Perhaps open one and check what material the gears are. White plastic, nylon, Black plastic-like material, carbonite and silver is metal, which is the most popular.

Good luck with the sale!

minimalitia1 · 08-13-2010, 07:34 PM

want to sell the tray?

kyles · 08-24-2010, 08:52 PM

make an offer on the tray. It seems that some are worried about the tray as others appreciate the design. $280 shipped for the Heli.

Zero G · 08-25-2010, 09:19 PM

To summarize your offer to sell:
Trex 450se V2.
Gy401 gyro
Futaba S9257 tail servo
un-known main servos
Ar6200 Spektrum receiver
Gorilla gear main gear
Align carbon fiber main rotor blades
Align motor and speed controller
1800mah Hyperion Litestorm VX battery

one more set of carbon blades and a bag of extra parts
thunderpower 2250mah battery pack

modified battery tray

$280 shipped US.

I'll take it if you can do PayPal. Let me know. Thanks.

Tom

skypup · 08-26-2010, 10:20 AM

Do you have any references? I've noticed no previous sales activity/ Thanks

Zero G · 08-26-2010, 10:32 AM

Quote:

Originally Posted by skypup

Do you have any references? I've noticed no previous sales activity/ Thanks

Who, me? I need references to buy something? I have 1800 feedbacks on E-Pay, if that helps.

kyles · 08-26-2010, 02:54 PM

You are correct. Everything minus the thunderpower pack. I do pay-pal

06-18-2010, 05:24 PM	#1 (permalink)
kyles Registered Users Join Date: Nov 2009	T-rex 450se V2 Alright, as most of the stories go: I got into the hobby and realized that it was out of my skill level and can not afford to repair the helicopter as I learn to fly. I bought the 450 used from the LHS and bound it to my dx7. I enjoy flying but can not dedicate the time necessary to succeed in this wonderful sport. I think ill stick to my fixed wing flying for now. This is a Trex 450se V2. Gy401 gyro Futaba S9257 tail servo un-known main servos Ar6200 Spektrum receiver Gorilla gear main gear Align carbon fiber main rotor blades Align motor and speed controller 1800mah Hyperion Litestorm VX battery any other questions feel free to ask. I am asking $350USD o.b.o. plus shipping Kyle Attached Thumbnails

07-16-2010, 09:19 AM	#9 (permalink)
Bid Doctor Registered Users My HF Map location Join Date: Jul 2008	PM sent Sent a PM. You may have a sale if you can answer question in PM.

07-16-2010, 09:58 AM	#10 (permalink)
kyles Registered Users Thread Starter Join Date: Nov 2009	I have had a few questions about the servos, rotor head and battery holder. Here are some updated pictures. Attached Thumbnails

07-16-2010, 10:00 AM	#11 (permalink)
kyles Registered Users Thread Starter Join Date: Nov 2009	Here are some more pictures. Attached Thumbnails

08-12-2010, 08:14 PM	#13 (permalink)
minimalitia1 Registered Users My HF Map location Join Date: Jul 2009	i like your battery tray mod. looks like it supports the b attery quiet well. i know my factory carbon tray flexes like a beast and will sometimes cause my battery straps to come undone... anyways ab your servos they look like hitec's to me. probly HS65HB's or HS65MG's. __________________ TREX450V2-scorp -8,GY520,HS5056MG,S9257.TREX600NSP-OS50Hyper,S9452's,DS650,G5's.TREX600Sport-OS55HZ, A6020, DS620.TREX700NSP-YS91SR, DS610, DS650, 3G.RAPPY30-OS37,DS821's,GY401

06-20-2010, 07:07 AM	#2 (permalink)
kyles Registered Users Thread Starter Join Date: Nov 2009	i have one more set of carbon blades and a bag of extra parts. i also have a thunderpower 2250mah battery pack that goes with. i have a triton eq charger that is also available if we negotiate a price. make realistic offers

06-29-2010, 11:56 AM	#3 (permalink)
kyles Registered Users Thread Starter Join Date: Nov 2009	Is my price too high? Is there not a market for the Trex 450 any more? I need to sell this. Make some offers. Kyle

06-29-2010, 07:30 PM	#4 (permalink)
SoarWest Registered Users Join Date: Jun 2010	Is it possible to read what the main servos are? What colors are the wires? It appears the nose has some kind of mod... to hold the battery tray and connect it to the lower plate? A clear pic of the head and tail would help. THanks.

06-29-2010, 09:02 PM	#5 (permalink)
kyles Registered Users Thread Starter Join Date: Nov 2009	sale pending

07-13-2010, 07:46 PM	#6 (permalink)
kyles Registered Users Thread Starter Join Date: Nov 2009	Sale did not go through, it was a bogus offer. I will do $300 shipped to any of the 48 continental States. Any other location will have to be discussed.

07-15-2010, 09:25 PM	#7 (permalink)
darmie Registered Users Join Date: Dec 2008	As Sorewest was asking about, can you offer some information about the battery holder? I've been looking at getting a blade, but If I can find a radio, I'd be interested.. Thanks..//

07-15-2010, 09:38 PM	#8 (permalink)
kyles Registered Users Thread Starter Join Date: Nov 2009	The battery holder is something I built out of thin fiberglass sheet and painted black. I am a structural engineer and thought that this would reduce the possibility of having the battery damaged on an impact. The battery mount can be removed and the old battery plate can be installed. The side frame screws hold the battery mount that I fabricated in place. The rotor head is all aluminum as is the tail rotor head..

08-12-2010, 08:57 AM	#12 (permalink)
kyles Registered Users Thread Starter Join Date: Nov 2009	still for sale. $300 shipped in the USA.

08-13-2010, 01:42 AM	#14 (permalink)
B2TheEYo Join Date: Feb 2009	Very cool mod, your abilities are very valuable in this industry improving designs and possibly even making new ones, I think you should stick at it if you can. The servos are Hitec 65's, I can't say which ones as I cannot see through the cases. Perhaps open one and check what material the gears are. White plastic, nylon, Black plastic-like material, carbonite and silver is metal, which is the most popular. Good luck with the sale!

08-13-2010, 07:34 PM	#15 (permalink)
minimalitia1 Registered Users My HF Map location Join Date: Jul 2009	want to sell the tray? __________________ TREX450V2-scorp -8,GY520,HS5056MG,S9257.TREX600NSP-OS50Hyper,S9452's,DS650,G5's.TREX600Sport-OS55HZ, A6020, DS620.TREX700NSP-YS91SR, DS610, DS650, 3G.RAPPY30-OS37,DS821's,GY401

08-24-2010, 08:52 PM	#16 (permalink)
kyles Registered Users Thread Starter Join Date: Nov 2009	make an offer on the tray. It seems that some are worried about the tray as others appreciate the design. $280 shipped for the Heli.

08-25-2010, 09:19 PM	#17 (permalink)
Zero G Registered Users Join Date: Aug 2010	To summarize your offer to sell: Trex 450se V2. Gy401 gyro Futaba S9257 tail servo un-known main servos Ar6200 Spektrum receiver Gorilla gear main gear Align carbon fiber main rotor blades Align motor and speed controller 1800mah Hyperion Litestorm VX battery one more set of carbon blades and a bag of extra parts thunderpower 2250mah battery pack modified battery tray $280 shipped US. I'll take it if you can do PayPal. Let me know. Thanks. Tom Last edited by Zero G; 08-26-2010 at 10:47 AM..

08-26-2010, 10:20 AM	#18 (permalink)
skypup Registered Users Join Date: Aug 2006	sales Do you have any references? I've noticed no previous sales activity/ Thanks

08-26-2010, 02:54 PM	#20 (permalink)
kyles Registered Users Thread Starter Join Date: Nov 2009	You are correct. Everything minus the thunderpower pack. I do pay-pal

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in