START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Hirobo Nitro Helicopters Hirobo Freya Evo Eagle Helicopters Discussion |
|
LinkBack | Thread Tools | Display Modes |
12-13-2006, 07:16 PM | #1 (permalink) |
Join Date: Oct 2005
|
Phasing Ring Problem on the EVO 50
I have read alot of posts about the phasing ring sliping / turning on the main mask causing all sorts of problems.
I have just picked up my new EVO 50 kit and there is a separate sheet attached to the instructions showing extra grub screws / bolts on the phasing ring which I believe is Hirobo's fix to the above problem. Can anyone tell me if the fix has been successful or should I still consider getting the metal version of the ring? Any feedback is appreciated. Glenn |
Sponsored Links | |||
Advertisement |
|
12-13-2006, 08:50 PM | #2 (permalink) |
Registered Users
|
The plastic one works fine. I used them for a long time before I upgrade to the metal on all 5 of the evo's I had. Don't overtighten them and strip the plastic though. Also adding a bit of green locktite to it will add a bit of extra insurance.
__________________
Jon Jennings |
Thread Tools | |
Display Modes | |
|
|