RTF Gaui x3 DX18 package

[heliinwy]

Life has changed and I have to sell my heli stuff. I have a Gaui X3 torque tube with align 360 blades, Mks DS92A+ cyclics and a Mks DS8910A+ on the tail, YEP60 esc and programming card, and hobbywing rpm sensor, Align 460mx 6s motor, Ikon FBL with bluetooth adapter and two DSMX sats, and two pulse 1350mah lipos, as new as the airframe, never ran below 3.82v. I have not counted but heli has between 15-20 flights, never crashed. I did have one near tipover on the maiden spin up, didnt tip over all the way but did scratch the blade tips slightly. Heli flies great , everything works like it should the electronics are not as new as the heli but all work fine. Its hard to see but the Ikon is mounted inside the frame. I am also selling my DX18v1 its only a few months old and still has the factory plastic on the screen. It has the updated firmware and everything it came with, AR9020-x receiver and the factory box etc... I will also include all the other misc items I have, lipo connectors, spare screws a 40amp esc and whatever else I can find. If someone takes the whole package I will also include my copy of Realflight7 and the transmitter adapter. $900 pp and shipped in the us. If I have to seperate the DSMX sats will go with the DX18, but I do have one DSM2 sat I can put with the x3. I hate to sell everything but family comes first. I forgot to mention I will also include a skyrc digital pitch gauge and a set of MIP hex drivers, and exi tool set with the package.

[heliinwy]

bump, I know it seems expensive but the heli alone would cost $800 with whats included.

[heliinwy]

bump