Register Now

Matthew · 05-10-2004, 07:11 PM

Well I've tried all day to get some bling for my Raptor 60V2 but no one has all the bling in one place. Any one know who else sell Quick UK or Top dragon stuff. Also when you get either UK OR TG what size blades do you use? As far as the grips go,I know the length. Also can you use the spaces that come with TT blades?

Thanks
Matthew

capebob · 05-10-2004, 07:21 PM

Matthew, have you tried to order directly from Quick UK. They should have everything.

http://www.quickuk.co.uk/

Bob

Matthew · 05-10-2004, 07:26 PM

No, I was hopping to get it all by Thursday. Do you think they can get it here by then?

capebob · 05-10-2004, 08:22 PM

Yes, but at a price.

Bob

Matthew · 05-10-2004, 09:05 PM

Yea I figuerd that

. They don't have the tail grips though. Anyone know who has them?

WillJames · 05-11-2004, 04:02 AM

HI Matthew. As you know, I would pick the QUK stuff over the TD. The QUK heads come with two sets of different spacers for the mains, and the ones you have will work fine.(TT & F&G) Get yourself a standard vigor tail setup instead of metal bling tail. You can get all the vigor tail parts that go right on your stock TT tail output shaft for about 60.00. I am pretty sure Mac Hodges at Hodges Hobbies has the vigor tail stuff in kit form for R60-R90.

Matthew · 05-11-2004, 06:43 AM

Great thanks Wll

I'll do that today

WillJames · 05-11-2004, 07:17 AM

You will LOVE the vigor parts. Relatively cheap, and work great. No more set screws where you have to take the grips off to do maintenance. The Vigor axle is also steel and much more durable than the aluminum Raptor one. You can remove the axle with grips and blades attached to balance it on your highpoint.

Matthew · 05-11-2004, 07:35 PM

Will

did what you said got all the bling. should be here bye Friday at the latest. only thing I didn't get was the Quick swash I went with TT's on that.

Matthew

WillJames · 05-11-2004, 08:13 PM

The TT swash is a very nice unit. You will not be disappointed.

Matthew · 05-11-2004, 08:20 PM

I'll put the before and after shots up when I get done. I even got the quick frame spacers. Oh one more thing the price was the same for either one.

05-10-2004, 07:11 PM	#1 (permalink)
Matthew My HF Map location Join Date: Apr 2004	Quick UK and Top Dragon Well I've tried all day to get some bling for my Raptor 60V2 but no one has all the bling in one place. Any one know who else sell Quick UK or Top dragon stuff. Also when you get either UK OR TG what size blades do you use? As far as the grips go,I know the length. Also can you use the spaces that come with TT blades? Thanks Matthew

05-10-2004, 07:21 PM	#2 (permalink)
capebob Registered Users My HF Map location Join Date: Apr 2004	Matthew, have you tried to order directly from Quick UK. They should have everything. http://www.quickuk.co.uk/ Bob __________________ Samuel Adams field rep Buffalo Wings field rep Success is the ability to go from one failure to another with no loss of enthusiasm. Churchill

05-10-2004, 08:22 PM	#4 (permalink)
capebob Registered Users My HF Map location Join Date: Apr 2004	Yes, but at a price. Bob __________________ Samuel Adams field rep Buffalo Wings field rep Success is the ability to go from one failure to another with no loss of enthusiasm. Churchill

05-11-2004, 04:02 AM	#6 (permalink)
WillJames Registered User My HF Map location Join Date: Mar 2004	HI Matthew. As you know, I would pick the QUK stuff over the TD. The QUK heads come with two sets of different spacers for the mains, and the ones you have will work fine.(TT & F&G) Get yourself a standard vigor tail setup instead of metal bling tail. You can get all the vigor tail parts that go right on your stock TT tail output shaft for about 60.00. I am pretty sure Mac Hodges at Hodges Hobbies has the vigor tail stuff in kit form for R60-R90. __________________ William James Crazy wife still trying to kill me.

05-11-2004, 07:17 AM	#8 (permalink)
WillJames Registered User My HF Map location Join Date: Mar 2004	You will LOVE the vigor parts. Relatively cheap, and work great. No more set screws where you have to take the grips off to do maintenance. The Vigor axle is also steel and much more durable than the aluminum Raptor one. You can remove the axle with grips and blades attached to balance it on your highpoint. __________________ William James Crazy wife still trying to kill me.

05-10-2004, 07:26 PM	#3 (permalink)
Matthew Thread Starter My HF Map location Join Date: Apr 2004	No, I was hopping to get it all by Thursday. Do you think they can get it here by then?

05-10-2004, 09:05 PM	#5 (permalink)
Matthew Thread Starter My HF Map location Join Date: Apr 2004	Yea I figuerd that . They don't have the tail grips though. Anyone know who has them?

05-11-2004, 06:43 AM	#7 (permalink)
Matthew Thread Starter My HF Map location Join Date: Apr 2004	Great thanks Wll I'll do that today

05-11-2004, 07:35 PM	#9 (permalink)
Matthew Thread Starter My HF Map location Join Date: Apr 2004	Will did what you said got all the bling. should be here bye Friday at the latest. only thing I didn't get was the Quick swash I went with TT's on that. Matthew

05-11-2004, 08:13 PM	#10 (permalink)
WillJames Registered User My HF Map location Join Date: Mar 2004	The TT swash is a very nice unit. You will not be disappointed. __________________ William James Crazy wife still trying to kill me.

05-11-2004, 08:20 PM	#11 (permalink)
Matthew Thread Starter My HF Map location Join Date: Apr 2004	I'll put the before and after shots up when I get done. I even got the quick frame spacers. Oh one more thing the price was the same for either one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in