Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopters > Aerial Videography and Photography


Aerial Videography and Photography Aerial Video/Photo from R/C Helicopters


Reply
 
Thread Tools Display Modes
Old 09-04-2010, 01:37 PM   #1
JonnyKango
Registered Users
 

Join Date: Jul 2010
Location: London UK
Default FlyCamOne Eco V2 firmware update guide

Seems many people online are having problems with this. The manual instructions are seriously lacking, and the README.txt in the download is abit vague also.
So now i have mine sorted, thought i'd share

Steps:

1. Download the firmware zip file from here: http://www.flycamone.com/acme2010/do...Oe/01_FCOe.zip

2. Unpack THE WHOLE zip file (make sure the .bin file is there too) to a folder of your making (i didn't do this first time and ran into problems ie 'cannot start device')

3. Install the file "STKO2H 2.O Reinstall" [run as admin on Vista]. Ignore certification warnings (note STKO2H [no 'U' in the filename]) - IMPORTANT you may get a malware warning from your virus protection, go ahead and add to exeptions or click ignore!!

4. Restart your PC

5. goto control panel/programs and features and confirm that STKO2H 2.0 is installed

6. confirm that the switch on FCOeV2 marked on/off is 'OFF'

7. connect power to FCOeV2 - either via your BEC system (RX port) or by 1 cell lipo external battery

8. WHILST HOLDING the white button in the corner of your board on FCOeV2, connect the USB between FCOeV2 and your PC

9. give windows a few secs to install the driver for the cam, when windows confirms installation.......

10. run the other EXE in the zip folder named: "STKO2HU-Reinstall" (note the 'U' and dash in filename) [run as admin on Vista]

11. you should now be faced with a screen, prompting a confirmation, click 'update'

12. if all went well, you should now have a screen with two pull down menu's - DRAM timing and DRAM size, set them to:

DRAM timing 0x35
DRAM size 8M

13. confirm and wait for 30-40 secs, and confirmation of correct update will be displayed

Hope this helps someone, any questions, i'll help if i can

This was done on Vista Ultimate x86

Happy flying
__________________
Trex 450 build incoming
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Belt CP V2 carbon - Crashed & under repair
Twister FP 35mhz FM - might make 2.4 dunno
4ch co-axle indoor micro - rainy days & night time
3ch co-axle indoor micro - visitors and possible converts

Last edited by JonnyKango; 09-05-2010 at 07:51 AM..
JonnyKango is offline        Reply With Quote
Old 09-04-2010, 03:34 PM   #2
Jungle Bob
Registered Users
 
Posts: 2,407
 

Join Date: Jun 2006
Location: Sabah, Borneo
Default

Thanx, I have had a Flycam v2 sittng around for a while which I haven't used. I may follow your instructions and get the thing up and running - cheers
__________________
May the forest be with you
Jungle Bob is offline        Reply With Quote
Reply

Tags
fcoe flycamone firmware




Unregistered
Go Back   HeliFreak > R/C Helicopters > Aerial Videography and Photography


Aerial Videography and Photography Aerial Video/Photo from R/C Helicopters

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com