Register Now

Beckler · 03-07-2012, 07:42 AM

http://www.heliplane.net/2012/03/ali...250-v2-teaser/
What are differences between this and 250 Pro?

JoeW · 03-07-2012, 09:37 AM

It's FBL with a 3GX on it. That looks like about the only difference.

The FBL head may have a 1 piece head and washout base but it's hard to tell for sure from that.

I'll have that built by the end of next week

all I'm waiting on is the servo tray for my Pro/V2.

Beckler · 03-07-2012, 10:19 AM

Well it mentions a redesigned chassis, but does that mean from the SE or the Pro. I doubt the 3GX won't fit in the Pro, so this 'V2' must just be a Pro FBL?

JoeW · 03-07-2012, 11:25 AM

The chassis looks the same as the 'Pro'.

I'm hopeful that the head is redesigned slightly to integrate the swash follower/washout.

Russers · 03-07-2012, 12:56 PM

Look at the pic it's a redesigned Pro

im2tall · 03-07-2012, 03:27 PM

So basically all I need to turn my 250 into a pro are the lower chassis plates,and the servo mount?Is that right !!?

JoeW · 03-07-2012, 04:27 PM

Upper and lower frames, new servo mount and battery mount, new anti rotation bracket, new servo rod, new tail case and the canopy.

Not sure if the cano is actually different though.

rc_dude · 03-09-2012, 09:48 AM

Quote:

Originally Posted by JoeW

Upper and lower frames, new servo mount and battery mount, new anti rotation bracket, new servo rod, new tail case and the canopy.

Not sure if the cano is actually different though.

Where can you buy these parts?

JoeW · 03-09-2012, 10:15 AM

Ask your favorite LHS, I just did a quick search and pretty much every Align online retailer has them. I got mine from RotorQuest.

noddyflyer · 03-09-2012, 12:34 PM

just ordered the frame parts (not seen the antirotation bracket for sale yet) TT on its way got the rest of the spares in the spares box......mick

JoeW · 03-09-2012, 01:06 PM

I got all my stuff from RotorQuest.com, they don't have the AR bracket yet either, they say next week.

jfh666 · 03-10-2012, 10:20 AM

im dubious

JoeW · 03-10-2012, 10:55 AM

Actually, Rotorquest has stock of the ar and servo tray now.

rc_dude · 03-10-2012, 05:30 PM

Does anyone know if the SE upper frame can be mated with the PRO lower frame? The reason I ask, is I just bought the KDE AR bracket and would like to use it when I convert my SE to a PRO.

jfh666 · 03-10-2012, 06:39 PM

Quote:

Originally Posted by JoeW

Actually, Rotorquest has stock of the ar and servo tray now.

If you have the tail servo tray - can you tell me if somewhat big servos (HSG-5084) would fit in it?

timmay · 03-13-2012, 10:54 PM

I bet it will be torque tubed :-)

03-07-2012, 07:42 AM	#1 (permalink)
Beckler Registered Users Join Date: Nov 2009	T-Rex 250 V2 http://www.heliplane.net/2012/03/ali...250-v2-teaser/ What are differences between this and 250 Pro?

03-07-2012, 09:37 AM	#2 (permalink)
JoeW Registered Users My HF Map location Join Date: Apr 2011	It's FBL with a 3GX on it. That looks like about the only difference. The FBL head may have a 1 piece head and washout base but it's hard to tell for sure from that. I'll have that built by the end of next week all I'm waiting on is the servo tray for my Pro/V2. __________________ TRex 250 DFC \| TRex 250 DFC (Scale) 2 @ TRex 450 DFC \| TRex 450 Pro 3G (Scale) TRex 550 DFC DX8 + Telemetery on all

03-07-2012, 11:25 AM	#4 (permalink)
JoeW Registered Users My HF Map location Join Date: Apr 2011	The chassis looks the same as the 'Pro'. I'm hopeful that the head is redesigned slightly to integrate the swash follower/washout. __________________ TRex 250 DFC \| TRex 250 DFC (Scale) 2 @ TRex 450 DFC \| TRex 450 Pro 3G (Scale) TRex 550 DFC DX8 + Telemetery on all

03-07-2012, 12:56 PM	#5 (permalink)
Russers Registered Users My HF Map location Join Date: Nov 2006	Look at the pic it's a redesigned Pro __________________ I want just one Heli... so I got some !!!!!! and a bunch of other stuff too

03-07-2012, 04:27 PM	#7 (permalink)
JoeW Registered Users My HF Map location Join Date: Apr 2011	Upper and lower frames, new servo mount and battery mount, new anti rotation bracket, new servo rod, new tail case and the canopy. Not sure if the cano is actually different though. __________________ TRex 250 DFC \| TRex 250 DFC (Scale) 2 @ TRex 450 DFC \| TRex 450 Pro 3G (Scale) TRex 550 DFC DX8 + Telemetery on all

03-07-2012, 10:19 AM	#3 (permalink)
Beckler Registered Users Thread Starter Join Date: Nov 2009	Well it mentions a redesigned chassis, but does that mean from the SE or the Pro. I doubt the 3GX won't fit in the Pro, so this 'V2' must just be a Pro FBL?

03-07-2012, 03:27 PM	#6 (permalink)
im2tall Registered Users Join Date: Feb 2012	So basically all I need to turn my 250 into a pro are the lower chassis plates,and the servo mount?Is that right !!?

03-09-2012, 10:15 AM	#9 (permalink)
JoeW Registered Users My HF Map location Join Date: Apr 2011	Ask your favorite LHS, I just did a quick search and pretty much every Align online retailer has them. I got mine from RotorQuest. __________________ TRex 250 DFC \| TRex 250 DFC (Scale) 2 @ TRex 450 DFC \| TRex 450 Pro 3G (Scale) TRex 550 DFC DX8 + Telemetery on all

03-09-2012, 12:34 PM	#10 (permalink)
noddyflyer Registered Users Join Date: Feb 2010	just ordered the frame parts (not seen the antirotation bracket for sale yet) TT on its way got the rest of the spares in the spares box......mick __________________ t250se 3blade head]t 250se fbl 250spmotor ,hitec 65hb cyclic gp780 giro mks 480mg /t250pro 250mx motor savox 257mg align g31 /ds 480mg tail/alzrc devil 450,kst 115mg cyclic/ds520 tail turnigy typhoon motor/yep 45a esc /dx8...my flying ability

03-09-2012, 01:06 PM	#11 (permalink)
JoeW Registered Users My HF Map location Join Date: Apr 2011	I got all my stuff from RotorQuest.com, they don't have the AR bracket yet either, they say next week. __________________ TRex 250 DFC \| TRex 250 DFC (Scale) 2 @ TRex 450 DFC \| TRex 450 Pro 3G (Scale) TRex 550 DFC DX8 + Telemetery on all

03-10-2012, 10:20 AM	#12 (permalink)
jfh666 Registered Users Join Date: Jul 2011	im dubious

03-10-2012, 10:55 AM	#13 (permalink)
JoeW Registered Users My HF Map location Join Date: Apr 2011	Actually, Rotorquest has stock of the ar and servo tray now. __________________ TRex 250 DFC \| TRex 250 DFC (Scale) 2 @ TRex 450 DFC \| TRex 450 Pro 3G (Scale) TRex 550 DFC DX8 + Telemetery on all

03-10-2012, 05:30 PM	#14 (permalink)
rc_dude Registered Users Join Date: Sep 2011	Does anyone know if the SE upper frame can be mated with the PRO lower frame? The reason I ask, is I just bought the KDE AR bracket and would like to use it when I convert my SE to a PRO.

03-13-2012, 10:54 PM	#16 (permalink)
timmay Registered Users My HF Map location Join Date: Dec 2008	I bet it will be torque tubed :-)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in