Register Now

kevinww · 09-09-2014, 11:33 AM

Distance is not stored on the card, i believe radio calculates this on the fly such that you have the last known location if anything should happen to the model.

When you have the GPS data selected, you can export a KML file via the File menu and then import this file to Google Earth to see the flight path.

4_Props · 10-05-2014, 03:05 PM

I think I found a bug. I'm getting the basic telemetry log data from my 350 QX, no TM1000 and the RX voltage shows 655.36. It should be zero as this value is not transmitted back to my DX6. A value of all F's indicates that there is "no data" from that sensor.

huxs · 10-16-2014, 11:16 AM

Hi
I put the aircraft in the car to test the gps I saved file as KML and loaded it into Google Earth The viewer shows the correct coordinates for the start and finish but the KML file when loaded into Google Earth only show the path for the first mile or so any ideas ?
Regds
Chris

kevinww · 10-17-2014, 02:15 AM

attach the tlm file and i'll have look.

LosD · 08-14-2015, 06:49 PM

Wow! This is super nice. I've been using the RoboSoft Spektrum Telemetry Viewer for a looong time, and was always pissed that it is so slow to load and parse files... But this just flies, even when reading directly from a card reader.

The interface is also nice and clean. Very well done!

09-09-2014, 11:33 AM	#141 (permalink)
kevinww Registered Users Thread Starter Join Date: Nov 2008	Distance is not stored on the card, i believe radio calculates this on the fly such that you have the last known location if anything should happen to the model. When you have the GPS data selected, you can export a KML file via the File menu and then import this file to Google Earth to see the flight path. __________________ Trex 600N Pro with Vibe 50 Head and YS91RS motor, Vibe 50 VBar FBL, Trex744 VBar FBL MW44 Turbine, Logo 800 XXTreme, Logo 600 12s, Logo 500SE, Vario UH-1D (Building), Scratch built 625mm Quad.

10-16-2014, 11:16 AM	#143 (permalink)
huxs Registered Users Join Date: Sep 2014	Spektrum Viewer Hi I put the aircraft in the car to test the gps I saved file as KML and loaded it into Google Earth The viewer shows the correct coordinates for the start and finish but the KML file when loaded into Google Earth only show the path for the first mile or so any ideas ? Regds Chris

10-17-2014, 02:15 AM	#144 (permalink)
kevinww Registered Users Thread Starter Join Date: Nov 2008	attach the tlm file and i'll have look. __________________ Trex 600N Pro with Vibe 50 Head and YS91RS motor, Vibe 50 VBar FBL, Trex744 VBar FBL MW44 Turbine, Logo 800 XXTreme, Logo 600 12s, Logo 500SE, Vario UH-1D (Building), Scratch built 625mm Quad.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-05-2014, 03:05 PM	#142 (permalink)
4_Props Registered Users Join Date: Feb 2014	I think I found a bug. I'm getting the basic telemetry log data from my 350 QX, no TM1000 and the RX voltage shows 655.36. It should be zero as this value is not transmitted back to my DX6. A value of all F's indicates that there is "no data" from that sensor.

08-14-2015, 06:49 PM	#145 (permalink)
LosD Registered Users Join Date: Feb 2012	Wow! This is super nice. I've been using the RoboSoft Spektrum Telemetry Viewer for a looong time, and was always pissed that it is so slow to load and parse files... But this just flies, even when reading directly from a card reader. The interface is also nice and clean. Very well done!

Register Now

Log-in