Register Now

Nspector8 · 10-11-2010, 11:08 AM

I'm running the wood Align Pro blades with a 12T pinion. I read several places that recommended running an 80% throttle curve with 50% pitch at center stick with the 12T pinion. Will I be safe running these woodies at these settings? What throttle/pitch curves would you guys recommend for me to get the longest run time but still be safe with the woodies?

Thanks!

kjdubuque · 10-11-2010, 11:25 AM

I was running the Pro woodies with a 12T with an 85% (Idle 1) and 95% (Idle 2) throttle curves. I only ran them once at 85% and I never ran them in normal mode so my pitch curves were linear at +/- 11. Never had any problem with them at this speed.

10-11-2010, 11:08 AM	#1 (permalink)
Nspector8 Registered Users Join Date: Jul 2010 Location: North Texas	Pitch/Throttle curves for Align woodies? I'm running the wood Align Pro blades with a 12T pinion. I read several places that recommended running an 80% throttle curve with 50% pitch at center stick with the 12T pinion. Will I be safe running these woodies at these settings? What throttle/pitch curves would you guys recommend for me to get the longest run time but still be safe with the woodies? Thanks! __________________ Mike Align T-Rex 800E DFC / Align T-Rex 550E DFC / Align T-Rex 450L / Align T-Rex 450 Pro

10-11-2010, 11:25 AM	#2 (permalink)
kjdubuque Registered Users Join Date: Jan 2010	I was running the Pro woodies with a 12T with an 85% (Idle 1) and 95% (Idle 2) throttle curves. I only ran them once at 85% and I never ran them in normal mode so my pitch curves were linear at +/- 11. Never had any problem with them at this speed. __________________ Kris

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in