Register Now

chrisl · 08-30-2014, 01:23 PM

Updated my Gaui mini vbar to pro and now I have now elevator servo control. It worked before I upgraded. What happened? Went through and did a new set up and that didn't help!

helidude71 · 08-30-2014, 01:51 PM

So you have a yellow Gaui VBar?
Did you used the GAUI Pro version?

Not the regular VStabi version. (For the blue VBar.)

chrisl · 08-30-2014, 01:53 PM

Yes I used the gaui pro version.

helidude71 · 08-30-2014, 01:55 PM

Weird, can you try to go back to the express version, to see if elevator is back again?

chrisl · 08-30-2014, 02:05 PM

Just pulled the servo and tried it in another heli ! It's a bad servo. Good thing it stopped working on the ground! Tried a different servo in the vbar and it works. Thanks for the help. I feel stupid now!! Chris

helidude71 · 08-30-2014, 02:23 PM

No problem, glad you solved it.

OzDruiD · 08-31-2014, 08:24 AM

Quote:

Originally Posted by chrisl

I feel stupid now!! Chris

Only stupid question is the one you didnt ask .... and .. you did the right thing and "had a go" at troubleshooting it .. great to see.. well done.

08-30-2014, 01:23 PM	#1 (permalink)
chrisl Registered Users Join Date: Oct 2010	Updated to pro now no elevator servo?? Updated my Gaui mini vbar to pro and now I have now elevator servo control. It worked before I upgraded. What happened? Went through and did a new set up and that didn't help! __________________ 2 x Gaul nx4,Gaui gasser, Gaui x5, 600 scale Hughes 500e

08-30-2014, 01:51 PM	#2 (permalink)
helidude71 Registered Users Join Date: Apr 2010	So you have a yellow Gaui VBar? Did you used the GAUI Pro version? Not the regular VStabi version. (For the blue VBar.) __________________ TSH Gaui X5 FES, Spirit, S.Bus, HW100A V3, Formula swash/head TSH Gaui X3, Spirit, 6S, S.Bus, HW50A V3 Futaba T7C (I admit, also a Spektrum DX8 and some planks.) ;-) Phoenix R/C v5

08-30-2014, 01:53 PM	#3 (permalink)
chrisl Registered Users Thread Starter Join Date: Oct 2010	Yes I used the gaui pro version. __________________ 2 x Gaul nx4,Gaui gasser, Gaui x5, 600 scale Hughes 500e

08-30-2014, 01:55 PM	#4 (permalink)
helidude71 Registered Users Join Date: Apr 2010	Weird, can you try to go back to the express version, to see if elevator is back again? __________________ TSH Gaui X5 FES, Spirit, S.Bus, HW100A V3, Formula swash/head TSH Gaui X3, Spirit, 6S, S.Bus, HW50A V3 Futaba T7C (I admit, also a Spektrum DX8 and some planks.) ;-) Phoenix R/C v5

08-30-2014, 02:05 PM	#5 (permalink)
chrisl Registered Users Thread Starter Join Date: Oct 2010	Just pulled the servo and tried it in another heli ! It's a bad servo. Good thing it stopped working on the ground! Tried a different servo in the vbar and it works. Thanks for the help. I feel stupid now!! Chris __________________ 2 x Gaul nx4,Gaui gasser, Gaui x5, 600 scale Hughes 500e

08-30-2014, 02:23 PM	#6 (permalink)
helidude71 Registered Users Join Date: Apr 2010	No problem, glad you solved it. __________________ TSH Gaui X5 FES, Spirit, S.Bus, HW100A V3, Formula swash/head TSH Gaui X3, Spirit, 6S, S.Bus, HW50A V3 Futaba T7C (I admit, also a Spektrum DX8 and some planks.) ;-) Phoenix R/C v5

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in