Register Now

Pyth0n · 01-22-2009, 01:01 AM

My Futaba 7C is having some weird problem. When I pluged the throttle wont pass to 25% on the TH CURVE. It get 2 arrows one at point one and other at point 2.

First I thought it was a potentiometer problem, that something burned out.
Removed the battery let it without the battery for a coupple of minutes and them turned back on.
The TH CURVE now was working fine u could see the potentiometer wasnt the problem and how the radio was reading the signal from it.

Turned the radio off and turned my RX on and them the TX again. The problem simply appeared again.

Anyone have any tips? It happened from nowhere.

Skint Eastwood · 01-22-2009, 04:33 AM

best thing to do is create a new model and then transfer all your settings manually to the new model. That way you can be sure you havent altered something by 'accident'. If this doesnt work it sounds like something is wrong with you radio

Pyth0n · 01-22-2009, 08:19 AM

I already triet that.

Also I reseted the parameter just to be shure.

Tried to repeat the battery thing and see if I get the system to work again but no lucky.
It was a one time deal that when the battery was off for some minutes back on it was working.

Going to the store to exchange my radio to a working one.

It's bizarre the way this radio is malfunctioning. No reason to do this at all.

01-22-2009, 01:01 AM	#1 (permalink)
Pyth0n Join Date: Dec 2008	Futaba 7C throttle stick problem. My Futaba 7C is having some weird problem. When I pluged the throttle wont pass to 25% on the TH CURVE. It get 2 arrows one at point one and other at point 2. First I thought it was a potentiometer problem, that something burned out. Removed the battery let it without the battery for a coupple of minutes and them turned back on. The TH CURVE now was working fine u could see the potentiometer wasnt the problem and how the radio was reading the signal from it. Turned the radio off and turned my RX on and them the TX again. The problem simply appeared again. Anyone have any tips? It happened from nowhere.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-22-2009, 04:33 AM	#2 (permalink)
Skint Eastwood Join Date: Apr 2008	best thing to do is create a new model and then transfer all your settings manually to the new model. That way you can be sure you havent altered something by 'accident'. If this doesnt work it sounds like something is wrong with you radio

01-22-2009, 08:19 AM	#3 (permalink)
Pyth0n Thread Starter Join Date: Dec 2008	I already triet that. Also I reseted the parameter just to be shure. Tried to repeat the battery thing and see if I get the system to work again but no lucky. It was a one time deal that when the battery was off for some minutes back on it was working. Going to the store to exchange my radio to a working one. It's bizarre the way this radio is malfunctioning. No reason to do this at all.

Register Now

Log-in