Register Now

eightythree · 03-26-2009, 09:39 AM

all aluminum ES 550 for sale. aluminum frames, full aluminum head and tail.

-esky outrunner motor

-Gohbee 550 carbon main blades

-k&b tail blades.

-FG canopy.

-spares linkage ends, flybars, and main gears......

-extra dampers

-10T, 11T, and 12T pinions included to fly on 5s (12T stock) or 10 and 11 on 6s.

she flies great, very stable and never been crashed. perfect for someone going from beginner to moderate 3D. it does 3D manuvers great and very smooth!! only flown about 20-30 flights.

selling because i have to many helis.....

4 6s 5000mah lipos for sale in the battery/charger forum.
https://www.helifreak.com/showthread.php?t=127975

.......sorry, no servos, esc, gyro, or rx is included.......

looking to get $345 shipped. great deal for this size bird!

eightythree · 03-27-2009, 08:51 AM

RJ79 · 03-27-2009, 11:38 PM

I must say I got to see this heli in person about a week ago at a local field and it looks brand spanking new. I think that the outrage 550 stole its design from this heli because the frame and mechanical setup is very similar. I just had to say this is a VERY well taken care of heli and someone will be very happy with it

.

eightythree · 03-28-2009, 12:55 PM

thanks ronnie..

good like NEW heli. great deal for a newb/novice to moderate 3D flying.

eightythree · 03-29-2009, 12:57 AM

send pms with offers.. wont turn anything down thats reasonable.

eightythree · 03-29-2009, 01:29 AM

updated with pics...

3 extra maingears
3 extra damper sets
2 extra flybars
1 extra feather shaft
bag of extra links, balls, and hardware
10t, and 12t pinions..
Align white skids

again, electronics are not being sold with the kit..

i may consider selling the align servos with the kit if the price is right.

eightythree · 03-29-2009, 11:07 PM

StoopidSavant · 03-30-2009, 10:46 AM

Great deal on a great bird. If I didn't already have one I'd buy.

May I ask, where did you get the 10T and 11T pinions? If you're willing to separate, I'd buy those alone. Thanks a lot.

Fatdaddy · 03-31-2009, 07:30 AM

Is she sold yet??? What about them main geard? You want to part with them???

eightythree · 03-31-2009, 09:42 AM

please no parting out!! this heli is not sold yet.. peeps that need parts should just buy the whole heli for a parts kit! good price!

StoopidSavant- im not sure where i purchased the pinions. but they are the pitch that the Qucik of Japan EP-8 uses (or the pitch is close enough). search the esmart forum here, someone had posted where he found the pinions. ill check later for ya

StoopidSavant · 03-31-2009, 09:21 PM

Thanks for the info, and for helping to point me in the right direction. My previous searches hasn't turned up anything useful on E-Smart pinions.

And for that, you get another bump.

eightythree · 04-02-2009, 06:02 PM

......trade pending......

eightythree · 04-06-2009, 02:40 PM

traded for a NIB trex500 to anschuter2013

great guy to deal with!

03-26-2009, 09:39 AM	#1 (permalink)
eightythree Registered Users Join Date: Apr 2007	Esky Esmart 550 size heli FS $365 all aluminum ES 550 for sale. aluminum frames, full aluminum head and tail. -esky outrunner motor -Gohbee 550 carbon main blades -k&b tail blades. -FG canopy. -spares linkage ends, flybars, and main gears...... -extra dampers -10T, 11T, and 12T pinions included to fly on 5s (12T stock) or 10 and 11 on 6s. she flies great, very stable and never been crashed. perfect for someone going from beginner to moderate 3D. it does 3D manuvers great and very smooth!! only flown about 20-30 flights. selling because i have to many helis..... 4 6s 5000mah lipos for sale in the battery/charger forum. https://www.helifreak.com/showthread.php?t=127975 .......sorry, no servos, esc, gyro, or rx is included....... looking to get $345 shipped. great deal for this size bird! Last edited by eightythree; 03-29-2009 at 01:47 AM..

03-29-2009, 01:29 AM	#6 (permalink)
eightythree Registered Users Thread Starter Join Date: Apr 2007	pics updated with pics... 3 extra maingears 3 extra damper sets 2 extra flybars 1 extra feather shaft bag of extra links, balls, and hardware 10t, and 12t pinions.. Align white skids again, electronics are not being sold with the kit.. i may consider selling the align servos with the kit if the price is right. Attached Thumbnails

03-31-2009, 07:30 AM	#9 (permalink)
Fatdaddy Registered Users Join Date: Jan 2009	??/ Is she sold yet??? What about them main geard? You want to part with them??? __________________ Blade mSR, HBK2 Xtreme Outrage G5 EXI500, HDX500, Esky 900 E-Smart CF Pro, Full Metal E Smart, Outrage 550 G-Smart. Pegusas

04-06-2009, 02:40 PM	#13 (permalink)
eightythree Registered Users Thread Starter Join Date: Apr 2007	trade complete traded for a NIB trex500 to anschuter2013 great guy to deal with!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-27-2009, 08:51 AM	#2 (permalink)
eightythree Registered Users Thread Starter Join Date: Apr 2007	bump

03-27-2009, 11:38 PM	#3 (permalink)
RJ79 Registered Users Join Date: Jul 2008	I must say I got to see this heli in person about a week ago at a local field and it looks brand spanking new. I think that the outrage 550 stole its design from this heli because the frame and mechanical setup is very similar. I just had to say this is a VERY well taken care of heli and someone will be very happy with it .

03-28-2009, 12:55 PM	#4 (permalink)
eightythree Registered Users Thread Starter Join Date: Apr 2007	thanks ronnie.. good like NEW heli. great deal for a newb/novice to moderate 3D flying.

03-29-2009, 12:57 AM	#5 (permalink)
eightythree Registered Users Thread Starter Join Date: Apr 2007	send pms with offers.. wont turn anything down thats reasonable.

03-29-2009, 11:07 PM	#7 (permalink)
eightythree Registered Users Thread Starter Join Date: Apr 2007	bump

03-30-2009, 10:46 AM	#8 (permalink)
StoopidSavant Join Date: Feb 2009	Great deal on a great bird. If I didn't already have one I'd buy. May I ask, where did you get the 10T and 11T pinions? If you're willing to separate, I'd buy those alone. Thanks a lot.

03-31-2009, 09:42 AM	#10 (permalink)
eightythree Registered Users Thread Starter Join Date: Apr 2007	please no parting out!! this heli is not sold yet.. peeps that need parts should just buy the whole heli for a parts kit! good price! StoopidSavant- im not sure where i purchased the pinions. but they are the pitch that the Qucik of Japan EP-8 uses (or the pitch is close enough). search the esmart forum here, someone had posted where he found the pinions. ill check later for ya

03-31-2009, 09:21 PM	#11 (permalink)
StoopidSavant Join Date: Feb 2009	Thanks for the info, and for helping to point me in the right direction. My previous searches hasn't turned up anything useful on E-Smart pinions. And for that, you get another bump.

04-02-2009, 06:02 PM	#12 (permalink)
eightythree Registered Users Thread Starter Join Date: Apr 2007	......trade pending......

Register Now

Log-in