Register Now

jacquesjb · 08-18-2009, 03:44 PM

Hi,

Is there another cheaper servo than Futaba (S9257,S9650 or S9254) than I could use in my HC500 for the tail servo?
I will use a Telebee(Gr302-AD) gyro with this one.

For the cyclic, can I use the Hitec HC225MG instead of HS82MG?

P/S: I know that it not the best configuration, but I just want an economical HC500 to have fun (sport flying).

Thank's for the future answer

B2TheEYo · 08-18-2009, 09:48 PM

I run a BMS-631MG on my HDX500's tail.

lotus7 · 08-19-2009, 06:04 AM

Look at the InoLab range of servos at Helidirect

08-18-2009, 03:44 PM	#1 (permalink)
jacquesjb Registered Users Join Date: Apr 2008	HC500 Servo choice economical Hi, Is there another cheaper servo than Futaba (S9257,S9650 or S9254) than I could use in my HC500 for the tail servo? I will use a Telebee(Gr302-AD) gyro with this one. For the cyclic, can I use the Hitec HC225MG instead of HS82MG? P/S: I know that it not the best configuration, but I just want an economical HC500 to have fun (sport flying). Thank's for the future answer __________________ Outrage 550: DS610, DS650, Xera 4020/1000, YGE-100, Spartan Vortex VX1N HDX HC500, Goblin 380, Vortex VX1E Gaui X7 Formula, Vortex VX1N

08-19-2009, 06:04 AM	#3 (permalink)
lotus7 Registered Users My HF Map location Join Date: Aug 2007	Look at the InoLab range of servos at Helidirect __________________ *Lotus7*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-18-2009, 09:48 PM	#2 (permalink)
B2TheEYo Join Date: Feb 2009	I run a BMS-631MG on my HDX500's tail.

Register Now

Log-in