Register Now

djaypro · 03-20-2013, 10:04 AM

I have ds 410s and a 9257 on tail. I am not good with fbl yet but would like to hear how I do this settup been reading the instruction book, do I need to set the 7200 to the servo HZ's? Do I center the servo's first? I am not sure about anything yet lol

newbheliusr · 03-20-2013, 10:34 AM

Do the steps In order.

Sent from my iPhone using Tapatalk. Spelling is optional.

Solmanbandit · 03-20-2013, 01:54 PM

Quote:

Originally Posted by newbheliusr

Do the steps In order.

+1 Start with A and work your way through the menus. FYI, there are two sets of menus. Make sure you hold the button down till the light goes solid to get to the setup menu.

djaypro · 03-20-2013, 04:03 PM

OK gonna see were this takes me I'll let ya know

djaypro · 03-20-2013, 05:20 PM

Got the light color blue meaning flat horizontal mount the next issue is the servo frequency. Says in the book always use the highest freq. servo allows. Im not seeing anything that shows frequency on the specs when I look up align 410 servo's. The number Im looking for is 50 to 200 Hz

xpantz · 03-20-2013, 05:39 PM

Quote:

Originally Posted by djaypro

Got the light color blue meaning flat horizontal mount the next issue is the servo frequency. Says in the book always use the highest freq. servo allows. Im not seeing anything that shows frequency on the specs when I look up align 410 servo's. The number Im looking for is 50 to 200 Hz

http://www.beastx.com/service_servoliste.php

Swash Tail
DS 410 red flashing 65 Hz blue 1520 µs purple 50 Hz

master65 · 03-20-2013, 05:57 PM

this really helped me out, I too am new to flybarless.

https://www.helifreak.com/showthread.php?t=305195

junior10 · 03-20-2013, 07:12 PM

"freddy can fly" on youtube does a great step by step for the micro beast x, check it out.

djaypro · 03-20-2013, 07:29 PM

got the list thanks,on step b does it do all the cyclic servo's? Now Im on step c "lol" doing the baby step through this.

djaypro · 03-20-2013, 07:41 PM

BTW move the tail rutter stick to change the settings ( I didn't know that)

03-20-2013, 10:04 AM	#1 (permalink)
djaypro Registered Users Join Date: Jun 2010	7200bx on 450 pro I have ds 410s and a 9257 on tail. I am not good with fbl yet but would like to hear how I do this settup been reading the instruction book, do I need to set the 7200 to the servo HZ's? Do I center the servo's first? I am not sure about anything yet lol

03-20-2013, 10:34 AM	#2 (permalink)
newbheliusr Registered Users Join Date: Apr 2011	7200bx on 450 pro Do the steps In order. Sent from my iPhone using Tapatalk. Spelling is optional. __________________ Heli's I have: Goblin 500 (Vbar Neo), Gaui X5(Vbar Neo), X7(Vbar Neo), Innova 600 Night heli (Vbar Neo Vbar Vcontrol I'm the not so newbheliusr as I have been here a while. But I like this name.

03-20-2013, 05:57 PM	#7 (permalink)
master65 Registered Users Join Date: Aug 2008	this really helped me out, I too am new to flybarless. https://www.helifreak.com/showthread.php?t=305195 __________________ 360 CFX, Parkzone visionaire

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-20-2013, 04:03 PM	#4 (permalink)
djaypro Registered Users Thread Starter Join Date: Jun 2010	OK gonna see were this takes me I'll let ya know

03-20-2013, 05:20 PM	#5 (permalink)
djaypro Registered Users Thread Starter Join Date: Jun 2010	Got the light color blue meaning flat horizontal mount the next issue is the servo frequency. Says in the book always use the highest freq. servo allows. Im not seeing anything that shows frequency on the specs when I look up align 410 servo's. The number Im looking for is 50 to 200 Hz

03-20-2013, 07:12 PM	#8 (permalink)
junior10 Registered Users Join Date: Nov 2011 Location: Silver Spring MD	"freddy can fly" on youtube does a great step by step for the micro beast x, check it out.

03-20-2013, 07:29 PM	#9 (permalink)
djaypro Registered Users Thread Starter Join Date: Jun 2010	got the list thanks,on step b does it do all the cyclic servo's? Now Im on step c "lol" doing the baby step through this.

03-20-2013, 07:41 PM	#10 (permalink)
djaypro Registered Users Thread Starter Join Date: Jun 2010	BTW move the tail rutter stick to change the settings ( I didn't know that)

Register Now

Log-in