START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Electric Micro/Mini Helicopters Electric Micro Helicopters Discussion |
|
LinkBack | Thread Tools | Display Modes |
02-17-2015, 07:39 AM | #1 (permalink) |
Registered Users
Join Date: Feb 2010
|
v977
hello guys,
i watched a few videos on you tube and thought this heli was worth to have, but mine won't hold the tail in any way. it keeps blowing out all the time. i maxed the rudder trim to the right to get a minimum control, but, yet, very poor tail stability. i've also attached bigger blades on the tail propeller to see if it improved things, but nothing. does anybody know how to solve it? i've ordered a syma x5c motor for the tail, but at this point i think i have a defective tail gyro or so. |
Sponsored Links | |||
Advertisement |
|
03-08-2015, 06:01 AM | #2 (permalink) | |
Registered Users
Join Date: Apr 2014
|
brushless tail
Quote:
i changed my tail to brushless and it works much beter and is very fast now. i used the buzzflyer .co.uk BFSE-BLTU upgrade and it is only 25 pounds from the uk. You will have to put a 1000ohm resistor across the original tail motor connections to get a good signal for the brushless esc. |
|
Thread Tools | |
Display Modes | |
|
|