DX9 throttle hold voice assign issue, and character move in profile name

[Skeezix]

Last night, I created a totally new profile in my DX9 for a new heli, rather than copying an existing profile that had all the voice commands I wanted.

I can get throttle hold to work, but can't get the voice assign to say 'THROTTLE HOLD!" when I engage the switch.

Furthermore, on the main screen, it indicates the flight mode, but will not change to HOLD when I engage the TH switch.

I haven't had these issues before and am running firmware 1.06 I believe.

Lastly, is there a way to move the characters in the name of the profile to the right, WITHOUT starting all over? I just need to shift the model's name to the right a few spaces, but can't find out how to do that.

Any advice would be welcomed.

[JonJet]

Heli Model Screen > Custom Voice Setup > Add New Sound Event >

Switch Change Report > Switch Inhibit > Select Switch > Select Position > Select Voice Command

Keep in mind that some switches have multiple positions, so you can add other voice commands to those positions...ie "time remaining" or "timer start(stop) as you wish

Hold Mode is attained by changing the title of the Spoken Flight Mode Menu in the System Setup Screen

Editing the model name is a complete edit - no shifting feature

[Skeezix]

Originally Posted by JonJet

Heli Model Screen > Custom Voice Setup > Add New Sound Event >

Switch Change Report > Switch Inhibit > Select Switch > Select Position > Select Voice Command

Keep in mind that some switches have multiple positions, so you can add other voice commands to those positions...ie "time remaining" or "timer start(stop) as you wish

Hold Mode is attained by changing the title of the Spoken Flight Mode Menu in the System Setup Screen

Editing the model name is a complete edit - no shifting feature

That's great - Thank you very much.
However, on the main screen it doesn't show HOLD when throttle hold is engaged. It simply shows the flight modes. How can I change it to show HOLD when throttle hold is engaged?

[JonJet]

Originally Posted by Skeezix

That's great - Thank you very much.
However, on the main screen it doesn't show HOLD when throttle hold is engaged. It simply shows the flight modes. How can I change it to show HOLD when throttle hold is engaged?

Edit the Spoken Flight Mode for the TH switch

[aerocal]

Originally Posted by JonJet

Heli Model Screen > Custom Voice Setup > Add New Sound Event >

Switch Change Report > Switch Inhibit > Select Switch > Select Position > Select Voice Command

Keep in mind that some switches have multiple positions, so you can add other voice commands to those positions...ie "time remaining" or "timer start(stop) as you wish

Hold Mode is attained by changing the title of the Spoken Flight Mode Menu in the System Setup Screen

Editing the model name is a complete edit - no shifting feature

No edit feature that you were aware of.
If you look through the list of available naming characters there are 2 selections.
They look like <> and >< with a line under them. These selections will add or delete a space to/from the character string.
Using add(<>)will push to the right all characters beyond the selected location.Using delete(><) will delete the character and pull the rest together without leaving a blank space.
Really handy not having to change every single character in a long name.

[Skeezix]

Originally Posted by aerocal

No edit feature that you were aware of.
If you look through the list of available naming characters there are 2 selections.
They look like <> and >< with a line under them. These selections will add or delete a space to/from the character string.
Using add(<>)will push to the right all characters beyond the selected location.Using delete(><) will delete the character and pull the rest together without leaving a blank space.
Really handy not having to change every single character in a long name.

Excellent! Thanks!

[JonJet]

Originally Posted by aerocal

No edit feature that you were aware of.
If you look through the list of available naming characters there are 2 selections.
They look like <> and >< with a line under them. These selections will add or delete a space to/from the character string.
Using add(<>)will push to the right all characters beyond the selected location.Using delete(><) will delete the character and pull the rest together without leaving a blank space.
Really handy not having to change every single character in a long name.

Yes...very cool...and thanks for the correction and new knowledge !